Tag Archives: belt

China high quality Transmission Belt Parts Gearbox Agricultural Machinery Mining Machinery Conveyor Chains High Speed Stock Bore Conveyor Chain Pitch Sprocket Wheel Hub Sprocket

Product Description

SPROCKET  5/8” X 3/8”  10B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B SERIES ROLLER CHAINS  
Pitch 15.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47.0 41.48 25 10 25 25 12 40 25 12 55
9 52.6 46.42 30 10 25 30 12 40 30 12 55
10 57.5 51.37 35 10 25 35 12 40 35 12 55
11 63.0 56.34 37 12 30 39 14 40 39 16 55
12 68.0 61.34 42 12 30 44 14 40 44 16 55
13 73.0 66.32 47 12 30 49 14 40 49 16 55
14 78.0 71.34 52 12 30 54 14 40 54 16 55
15 83.0 76.36 57 12 30 59 14 40 59 16 55
16 88.0 81.37 60 12 30 64 16 45 64 16 60
17 93.0 86.39 60 12 30 69 16 45 69 16 60
18 98.3 91.42 70 14 30 74 16 45 74 16 60
19 103.3 96.45 70 14 30 79 16 45 79 16 60
20 108.4 101.49 75 14 30 84 16 45 84 16 60
21 113.4 106.52 75 16 30 85 16 45 85 20 60
22 118.0 111.55 80 16 30 90 16 45 90 20 60
23 123.5 116.58 80 16 30 95 16 45 95 20 60
24 128.3 121.62 80 16 30 100 16 45 100 20 60
25 134.0 126.66 80 16 30 105 16 45 105 20 60
26 139.0 131.70 85 20 35 110 20 45 110 20 60
27 144.0 136.75 85 20 35 110 20 45 110 20 60
28 148.7 141.78 90 20 35 115 20 45 115 20 60
29 153.8 146.83 90 20 35 115 20 45 115 20 60
30 158.8 151.87 90 20 35 120 20 45 120 20 60
31 163.9 156.92 95 20 35 120 20 45 120 20 60
32 168.9 161.95 95 20 35 120 20 45 120 20 60
33 174.5 167.00 95 20 35 120 20 45 120 20 60
34 179.0 172.05 95 20 35 120 20 45 120 20 60
35 184.1 177.10 95 20 35 120 20 45 120 20 60
36 189.1 182.15 100 20 35 120 20 45 120 25 60
37 194.2 187.20 100 20 35 120 20 45 120 25 60
38 199.2 192.24 100 20 35 120 20 45 120 25 60
39 204.2 197.29 100 20 35 120 20 45 120 25 60
40 209.3 202.34 100 20 35 120 20 45 120 25 60
41 214.8 207.38 *100 20 40 120 20 50 *130 25 60
42 2,199 212.43 *100 20 40 120 20 50 *130 25 60
43 224.9 217.48 *100 20 40 120 20 50 *130 25 60
44 230.0 222.53 *100 20 40 120 20 50 *130 25 60
45 235.0 227.58 *100 20 40 *120 20 50 *130 25 60
46 240.1 232.63 *100 20 40 *120 20 50 *130 25 60
47 245.1 237.68 *100 20 40 *120 20 50 *130 25 60
48 250.2 242.73 *100 20 40 *120 20 50 *130 25 60
49 255.2 247.78 *100 20 40 *120 20 50 *130 25 60
50 260.3 252.82 *100 20 40 *120 20 50 *130 25 60
51 265.3 257.87 *100 20 40 *120 20 50 *130 25 60
52 270.4 262.92 *100 20 40 *120 20 50 *130 25 60
53 275.4 267.97 *100 20 40 *120 20 50 *130 25 60
54 280.5 273.03 *100 20 40 *120 20 50 *130 25 60
55 285.5 278.08 *100 20 40 *120 20 50 *130 25 60
56 290.6 283.13 *100 20 40 *120 20 50 *130 25 60
57 296.0 288.18 *100 20 40 *120 20 50 *130 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 64
59 305.7 298.28 *100 20 43 *120 20 57 *130 25 64
60 310.8 303.33 *100 20 43 *120 20 57 *130 25 64
62 321.4 313.43 *100 20 43 *120 20 57 *130 25 64
64 331.5 323.53 *100 20 43 *120 20 57 *130 25 67
65 336.5 328.58 *100 20 43 *120 20 57 *130 25 67
66 341.6 333.64 *100 20 43 *120 20 57 *130 25 67
68 351.7 343.74 *100 20 43 *120 20 57 *130 25 67
70 361.8 353.84 *100 20 43 *120 20 57 *130 25 67
72 371.9 363.94 *100 20 43 *120 20 57 *130 25 67
75 387.1 379.10 *100 20 43 *120 20 57 *130 25 67
76 392.1 384.15 *100 20 43 *120 20 57 *130 25 67
78 402.2 394.25 *100 20 43 *120 20 57 *130 25 67
80 412.3 404.36 *100 20 43 *130 20 57 *130 25 67
85 437.6 429.62 *100 20 50 *130 20 58 *130 25 67
90 462.8 454.88 *100 20 50 *130 20 58 *130 25 67
95 488.5 480.14 *100 20 50 *130 20 58 *130 25 67
100 513.4 505.40 *100 20 50 *130 20 58 *130 25 67
110 563.9 555.92 *100 20 50 *130 20 58 *130 25 67
114 584.1 576.13 *100 20 50 *130 20 58 *130 25 67
120 614.4 606.45 *100 20 50 *130 20 58 *130 25 67
125 639.7 631.51 *100 20 50 *130 20 58 *130 25 67

Notice: *welding hub

BASIC INFO.
 

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

INSTALLATION AND USING

The chain  spoket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Nonstandard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Electric Cars, Motorcycle, Machinery
Hardness: Hardened Tooth Surface
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

wheel sprocket

Best Lubrication Practices for wheel sprocket Systems

Proper lubrication is essential for maintaining the efficiency and longevity of wheel sprocket systems. The lubrication practices can vary depending on the specific application and the environment in which the system operates. Here are some best practices for lubricating wheel sprocket systems:

  • Cleanliness: Before applying any lubricant, ensure that the wheel sprocket surfaces are clean and free from dirt, debris, and old lubricant residue. Cleaning the components helps prevent contaminants from mixing with the lubricant and causing additional wear.
  • Choose the Right Lubricant: Select a lubricant specifically designed for the wheel sprocket system. Consider factors such as load, speed, temperature, and environmental conditions when choosing the appropriate lubricant. Some systems may require grease, while others may need oil-based lubricants.
  • Apply Adequate Amount: Apply the lubricant in the right quantity to ensure proper coverage of the contacting surfaces. Too little lubricant may not provide sufficient protection, while too much can lead to excess heat and waste.
  • Regular Lubrication Schedule: Establish a maintenance schedule for lubrication based on the operating conditions of the system. In high-demand applications, more frequent lubrication may be necessary to prevent premature wear.
  • Monitor and Reapply: Regularly monitor the condition of the wheel sprocket system and observe any signs of inadequate lubrication, such as increased friction or unusual noise. Reapply lubricant as needed to maintain optimal performance.
  • Re-lubrication After Cleaning: If the wheel sprocket system is cleaned, ensure that fresh lubricant is applied after cleaning to restore the protective layer.
  • Consider Lubrication Type: Depending on the application, consider using dry lubricants or solid lubricants for environments where dust and dirt accumulation may be a concern.

It’s essential to follow the manufacturer’s recommendations and guidelines for lubrication. Additionally, consult with lubrication experts or equipment suppliers for specific recommendations based on your wheel sprocket system’s unique requirements.

wheel sprocket

Noise and Vibration in wheel sprocket Configurations

In a wheel sprocket configuration, noise and vibration levels can vary depending on several factors:

  1. Quality of Components: The quality of the wheel sprocket components can significantly impact noise and vibration. Well-manufactured and precisely engineered components tend to produce less noise and vibration.
  2. Lubrication: Proper lubrication of the sprocket teeth and chain or belt can reduce friction, which in turn helps minimize noise and vibration.
  3. Alignment: Correct alignment between the wheel sprocket is crucial. Misalignment can lead to increased noise and vibration as the components may not mesh smoothly.
  4. Tension: Maintaining the appropriate tension in the chain or belt is essential. Insufficient tension can cause the chain to slap against the sprocket teeth, resulting in noise and vibration.
  5. Speed and Load: Higher speeds and heavier loads can lead to increased noise and vibration levels in the system.
  6. Wear and Damage: Worn-out or damaged components can create irregularities in motion, leading to increased noise and vibration.

To reduce noise and vibration in a wheel sprocket setup:

  • Use high-quality components from reputable suppliers.
  • Ensure proper lubrication with appropriate lubricants.
  • Regularly inspect and maintain the system to detect any misalignment, wear, or damage.
  • Follow manufacturer guidelines for chain or belt tensioning.
  • Consider using vibration-damping materials or mounting methods if necessary.

Minimizing noise and vibration not only improves the comfort and safety of the machinery but also extends the life of the components by reducing wear and fatigue.

wheel sprocket

Can a wheel sprocket System be Used in Bicycles and Other Vehicles?

Yes, a wheel sprocket system is commonly used in bicycles and various other vehicles. In bicycles, the wheel sprocket system is a fundamental part of the drivetrain, which transfers power from the rider’s legs to the wheels, propelling the bicycle forward.

The typical bicycle drivetrain consists of a chain, front sprockets (chainrings), rear sprockets (cassette), and the bicycle’s wheels. When the rider pedals the bicycle, the chain engages with the sprockets, and as a result, the rotational motion from the pedaling is transferred to the rear wheel.

The selection of sprocket sizes (number of teeth on chainrings and cassette) can affect the gear ratio, allowing cyclists to adjust their pedaling effort and speed to suit different terrains and riding conditions. Smaller sprockets provide easier pedaling for climbing steep hills, while larger sprockets offer higher speeds on flat or downhill sections.

Beyond bicycles, the wheel sprocket system is widely used in various other vehicles and machinery to transmit power and control speed. It can be found in motorcycles, mopeds, electric scooters, and even some small electric vehicles. Additionally, the wheel sprocket system is prevalent in industrial machinery, where precise speed control and torque transmission are essential.

The efficiency and reliability of the wheel sprocket system make it a versatile and practical choice for many vehicles and mechanical applications.

China high quality Transmission Belt Parts Gearbox Agricultural Machinery Mining Machinery Conveyor Chains High Speed Stock Bore Conveyor Chain Pitch Sprocket Wheel Hub Sprocket  China high quality Transmission Belt Parts Gearbox Agricultural Machinery Mining Machinery Conveyor Chains High Speed Stock Bore Conveyor Chain Pitch Sprocket Wheel Hub Sprocket
editor by CX 2024-04-16

China Hot selling CZPT Modular Belt Conveyor Injection Sprocket Wheel with FDA& Gsg Certificate

Product Description

Hairise modular Belt Conveyor Injection Sprocket wheel

Brand Name Hairise
Product  name Har400RB sprocket
Material Plastic
Inspection Equipments 3D Measure Instrument, CMM,  Spectrum Analyzers,  Electronic balance,  Microscope, Altimeter ,  Calipers,  Micrometer,etc.
Application field Parts are used on vehicles, printing machines, textile machines, electronic machines, etc.
Manufacturing process CNC machining Broaching, Drilling, Milling, Other Machining Services, Rapid Prototyping,
Turning,
QC inspection Make sure 100% inspection before the delivery

Advantages of the CZPT products:
1.this products are convenient to assembly and maintain
2.All color could be available
3.this modular conveyor belt can bear High mechanical strength
4.this modular conveyor belt has Excellent product handling performance
5.these modular conveyor belts are wear resistance and Oil Resistant
6.we are a professional conveyor system manufacturer, our product line contains modular belt, slat top chain, conveyor spare parts, conveyor system.
7.we can provide good after-sale service.
8.every product can be customized 

Application:
Bakery, Dairy, Fruit, and Vegetable
We have extensive experience in developing specialized solutions tailored to the needs of many different Bakery industry segments: bread and bun, fresh pastry (oven and fried pastry), pizza, pasta (fresh and dry), frozen bread, frozen pastry, cookies, and crackers, with our material handling equipment conveyor systems conveyor plastic modular belt conveyor you can get surprised!

Meat Poultry Seafood
With belts and accessories designed to meet the specific needs of fruit and vegetable processing and packaging applications, CZPT is committed to helping customers achieve their operational and business goals.
Hairise continues to develop new and better ways for customers to increase throughput efficiency, improve sanitation, and reduce the costs of belt ownership.
Material handling equipment conveyor systems conveyor plastic modular belt conveyor technology to meet the specific challenges of seafood processors. 

Ready Meals
Ready meal customers who equip their lines with CZPT Industrial plastic slat table top food grade conveyor chain realize many critical benefits, including:
·Reduced sanitation costs and improved food safety
·Improved line efficiency and maintain product alignment
·Reduced unscheduled downtime and reduced labor needs

Mu Jia Automation Technology(ZheJiang ) Co, Ltd.

MuJia is an integrated company engaged in the R&D, manufacture and sale of slat top chain,modular belt,conveyor system and other related components almost 20 years. Insisting on the operation principle of “Quality Based and Service First”, our company has won a high reputation through many years of development. We also cooperate with some CZPT domestic and overseas enterprises.

Our head office located in ZheJiang ,new factory located in ZheJiang province,covers an areas of 15,000 square meter,there are 3 main buildings:office building,conveyor assembly workshop and production workshop.More than 10 machines for producing,many hundreds of item models for meeting customer variety requirements.Our main products are modular belt,slat top chain,flexible chain,conveyor system,comb,rail,sprocket and other conveyor related components.They are widely used in food, soft drink, packaging & manufacturing, tobacco, medicine & chemical, electronics, automobiles and logistics industries.

Our modular belt and conveyor equipments sell to every corners of country, with more than 200 primary agents and 400 special service centers. Besides, we exported to more than 40 countries and regions, such as Africa, Latin America, Southeast Asia, Middle East, Central Asia Europe and America and etc. What’s more, CZPT  was proud to the ZheJiang equity trading custody center successfully Listed since 2008.

At the end of February, 2016, the covers area of 35,00 square CZPT CZPT headquarter Phase II Park was built up and used, which annual production capacity could be 10,000 loaders, modular belt conveyor and 3,000 conveyor systems .

Then the north base of CZPT started siince early December of 2016, can offer 10,000 conveyor, plastic modular belt and 13,000 flexible chains piece year. The factory is located in Haian District, HangZhou City, ZheJiang Province, covers 300,000 square meters.

Orients to “Technologic Innovation, Industrial Upgrade, Managerial Optimization, Brand Leap” business policy, insist on the core value of “Integrity, Studious, Innovation, Courageous, Appreciate”, Hairisebelt will constantly optimize the industrial layout, improve the governance structure, boost the pace of construction, to create a century-old industry CZPT brand.

Q1. Where is your factory located? How can I visit there?
A: All our clients, from home or abroad, are warmly welcomed to visit us. Before you visit our company, we can connect by phone! Our company is located in ZheJiang , China, near the ZheJiang Xihu (West Lake) Dis.ao International Airport. And our factory is in ZheJiang HangZhou, we will arrange cars to there.

Q2. I don’t know what belt I currently use. Can you help me identify my belt?
A: Our online belt identifier can help you narrow down the series and style of your current belt. If you need more specific information on plastic conveyor chain belt parts manufacturers, contact me freely for plastic chains/ belts/ PU/PVC/Rubber belts/ other components and conveyors.

Q3. What can you do If the products were broken?
(1) If goods were broken once you bought from me,I would replace them freely according to the proven photos.
(2) If the goods were broken when you used, we could provide 5 year quality guarantee for plastic conveyor chain belt parts manufacturers under common working environment.

Q4. Does CZPT provide PDF files of products?
A: Yes, in our download center you can find PDF files for a large number of our products.If you can not find what you are looking for, send me your request by email or contact me on Wechat or Whatsapp freely.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: Sprocket
Material: Plastic
Inside Material: Plastic
Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Wear-Resistant
Tensile Strength: Strong
Company Type: Manufacturer
Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

wheel sprocket

How to Identify and Troubleshoot Common Issues with Wheels and Sprockets

Identifying and troubleshooting common issues with wheels and sprockets can help you maintain their proper functioning and prevent potential problems. Here are some steps to follow:

  • Abnormal Noise: If you notice unusual noise during operation, it could indicate misalignment, worn sprockets, or a loose chain. Check for any loose bolts or fasteners and ensure proper alignment of the sprockets.
  • Chain Slippage: Chain slippage can occur due to insufficient tension or worn-out sprocket teeth. Check the chain tension and adjust it to the recommended level. Inspect the sprocket teeth for signs of wear and replace them if necessary.
  • Uneven Wear: Uneven wear on the sprocket teeth can be a result of misalignment or a worn-out chain. Check the alignment of the sprockets and adjust as needed. If the chain is stretched or has damaged links, replace it with a new one.
  • Excessive Vibration: Excessive vibration may be caused by imbalanced wheels or misaligned sprockets. Check for any bent or damaged wheels and ensure proper alignment of the sprockets.
  • Chain Skipping: If the chain skips over the sprocket teeth during operation, it could be due to worn sprocket teeth or a loose chain. Inspect the sprocket teeth for signs of wear and replace them if necessary. Adjust the chain tension to the proper level.
  • Chain Jamming: Chain jamming can occur if there is debris or dirt between the chain and sprockets. Clean the chain and sprockets thoroughly to remove any obstructions.
  • Excessive Chain Wear: Regularly inspect the chain for signs of wear, such as elongation, damaged links, or rust. Replace the chain if it is significantly worn to avoid damage to the sprockets.
  • Overheating: Overheating can be caused by high friction between the chain and sprockets or improper lubrication. Ensure proper lubrication and check for any misalignment or tight spots in the system.

By identifying these common issues and performing regular inspections, you can troubleshoot problems early on and take appropriate corrective measures, ensuring the smooth operation and longevity of the wheel sprocket assembly.

wheel sprocket

Using a Belt Sprocket in Place of a Chain Sprocket with a Wheel

Yes, in many cases, a belt sprocket can be used in place of a chain sprocket with a wheel, provided that the system is designed to accommodate the change.

Both chain sprockets and belt sprockets serve the same fundamental purpose of transferring rotational motion and power between the wheel and the driven component. However, there are some important considerations to keep in mind when replacing a chain sprocket with a belt sprocket:

  • Alignment: Belt sprockets and chain sprockets must be aligned properly with the wheel to ensure smooth and efficient power transmission. Any misalignment can cause premature wear and reduce the system’s overall performance.
  • Tension: Chain-driven systems require specific tension to prevent slack and maintain proper engagement between the sprockets and the chain. Belt-driven systems, on the other hand, require appropriate tension to prevent slippage. Ensuring the correct tension for the specific type of sprocket is crucial for reliable operation.
  • Load Capacity: Consider the load capacity and torque requirements of the system when selecting a belt sprocket. Belt sprockets may have different load-carrying capabilities compared to chain sprockets, and using the wrong type can lead to premature wear or failure.
  • Speed and RPM: Belt-driven systems may have different operating speeds and RPM limits compared to chain-driven systems. Ensure that the selected belt sprocket can handle the desired rotational speed without exceeding its design limitations.
  • System Design: Changing from a chain-driven system to a belt-driven system (or vice versa) may require modifications to the overall system design, including the size of the sprockets and the layout of the system. Consult with an engineer or a qualified professional to ensure that the replacement is appropriate and safe.

Overall, replacing a chain sprocket with a belt sprocket can be a viable option in certain applications. However, it’s essential to consider the factors mentioned above and evaluate the compatibility of the new sprocket with the existing system to achieve optimal performance and longevity.

wheel sprocket

Eco-Friendly Materials for Manufacturing Wheels and Sprockets

Yes, there are eco-friendly materials used for manufacturing wheels and sprockets. As industries strive to reduce their environmental impact and promote sustainability, manufacturers are exploring alternative materials that are more environmentally friendly. Some of the eco-friendly materials used for manufacturing wheels and sprockets include:

1. Recycled Materials:

Using recycled materials, such as recycled plastic or metal, can significantly reduce the demand for virgin raw materials and lower the overall carbon footprint. These materials are obtained from post-consumer or post-industrial waste and processed to create new products, reducing the need for new resource extraction.

2. Biodegradable Materials:

Biodegradable plastics, such as PLA (polylactic acid) and PHA (polyhydroxyalkanoates), are derived from renewable plant sources and can break down naturally in the environment. These materials are gaining popularity for applications where disposal or end-of-life considerations are critical.

3. Sustainable Composites:

Manufacturers are developing sustainable composite materials that combine renewable fibers, such as bamboo, hemp, or flax, with biodegradable resins. These composites offer good strength and rigidity while being more environmentally friendly compared to traditional fiber-reinforced plastics.

4. Natural Materials:

In some cases, natural materials like wood or bamboo are used to create sprockets and wheels for specific applications. These materials are renewable and biodegradable, making them a more sustainable choice.

5. Low-Toxicity Materials:

Some eco-friendly materials focus on reducing the use of harmful chemicals during manufacturing. Low-toxicity materials are not only better for the environment but also for the health and safety of workers involved in the production process.

When selecting eco-friendly materials for wheels and sprockets, it’s essential to consider factors such as the specific application, load-bearing requirements, and the material’s end-of-life characteristics. Manufacturers and users can contribute to environmental sustainability by opting for these eco-friendly alternatives in their machinery and equipment.

China Hot selling CZPT Modular Belt Conveyor Injection Sprocket Wheel with FDA& Gsg Certificate  China Hot selling CZPT Modular Belt Conveyor Injection Sprocket Wheel with FDA& Gsg Certificate
editor by CX 2024-04-11

China Custom Standard Heavy Duty Plastic Sprocket for Conveyor Belt Sprocket Wheel

Product Description

Product Discription

Packaging & Delivery
Packaging Details        Carton or Wooden Box
Delivery Time                5-7 working days

Company Information

Related Products

Exhibition 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material Capabilities: Plastic
Type: Conveyor
Name: Sprockets
Application: Transportation
Size: Customized
Usage: Transportation and Widely Usage
Samples:
US$ 0.01/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

wheel sprocket

wheel sprocket System in Heavy Machinery and Industrial Equipment

Yes, a wheel sprocket system is commonly used in heavy machinery and industrial equipment for power transmission and motion control. The wheel sprocket configuration is a versatile and efficient method of transmitting rotational force between two shafts.

In heavy machinery and industrial equipment, the wheel is typically attached to one shaft, while the sprocket is mounted on another shaft. A chain or a toothed belt is wrapped around the wheel sprocket, connecting them. When the wheel is rotated, the chain or belt engages with the sprocket, causing the sprocket and the connected shaft to rotate as well. This mechanism allows the transfer of power from one shaft to the other, enabling various components and parts of the machinery to function.

Common applications of the wheel sprocket system in heavy machinery include:

  • Construction Machinery: Wheel loaders, excavators, cranes, and other construction equipment often use wheel sprocket systems for efficient power transmission in various moving parts.
  • Material Handling Equipment: Forklifts, conveyor systems, and other material handling equipment utilize wheel sprocket configurations to move goods and materials smoothly and reliably.
  • Mining Equipment: Mining machinery, such as drilling rigs and conveyors, often incorporate wheel sprocket assemblies for power transmission in challenging environments.
  • Agricultural Machinery: Tractors, combines, and other agricultural equipment use wheel sprocket systems to drive various components like wheels and harvesting mechanisms.
  • Industrial Robotics: Robots and automated systems in manufacturing often utilize wheel sprocket setups for precise motion control and efficient power transmission.

One of the key advantages of the wheel sprocket system is its ability to handle heavy loads and transmit power over long distances. It is a reliable and cost-effective method of power transmission in various industrial settings. However, proper maintenance and alignment are crucial to ensuring the system’s optimal performance and longevity.

Overall, the wheel sprocket system is a widely used and effective power transmission solution in heavy machinery and industrial equipment, offering versatility and efficiency in a range of applications.

wheel sprocket

Noise and Vibration in wheel sprocket Configurations

In a wheel sprocket configuration, noise and vibration levels can vary depending on several factors:

  1. Quality of Components: The quality of the wheel sprocket components can significantly impact noise and vibration. Well-manufactured and precisely engineered components tend to produce less noise and vibration.
  2. Lubrication: Proper lubrication of the sprocket teeth and chain or belt can reduce friction, which in turn helps minimize noise and vibration.
  3. Alignment: Correct alignment between the wheel sprocket is crucial. Misalignment can lead to increased noise and vibration as the components may not mesh smoothly.
  4. Tension: Maintaining the appropriate tension in the chain or belt is essential. Insufficient tension can cause the chain to slap against the sprocket teeth, resulting in noise and vibration.
  5. Speed and Load: Higher speeds and heavier loads can lead to increased noise and vibration levels in the system.
  6. Wear and Damage: Worn-out or damaged components can create irregularities in motion, leading to increased noise and vibration.

To reduce noise and vibration in a wheel sprocket setup:

  • Use high-quality components from reputable suppliers.
  • Ensure proper lubrication with appropriate lubricants.
  • Regularly inspect and maintain the system to detect any misalignment, wear, or damage.
  • Follow manufacturer guidelines for chain or belt tensioning.
  • Consider using vibration-damping materials or mounting methods if necessary.

Minimizing noise and vibration not only improves the comfort and safety of the machinery but also extends the life of the components by reducing wear and fatigue.

wheel sprocket

Common Applications of Wheels and Sprockets in Machinery

Wheels and sprockets are crucial components used in various machinery and mechanical systems for power transmission, motion control, and mechanical advantage. Some common applications include:

1. Vehicles:

Wheels and sprockets are extensively used in vehicles, including automobiles, motorcycles, bicycles, and even heavy-duty trucks and construction equipment. Sprockets and chains are commonly found in motorcycles and bicycles for power transmission from the engine or pedals to the wheels.

2. Industrial Machinery:

In industrial settings, wheels and sprockets play a vital role in conveyor systems, where they are used to move materials or products along a production line. Sprockets are also employed in various machinery to transfer rotational motion and power between components.

3. Agricultural Equipment:

Agricultural machinery often relies on wheels and sprockets for functions such as driving tractors, operating harvesting equipment, and propelling irrigation systems.

4. Robotics:

Wheels and sprockets are commonly used in robotic systems to provide mobility and movement capabilities. Sprockets and chains or belts are used in robotic arms and joints to facilitate precise and controlled motion.

5. Material Handling:

Conveyor systems in warehouses and distribution centers utilize wheels and sprockets to move packages, products, and materials efficiently. The sprockets engage with conveyor chains to create a continuous loop for material transport.

6. Mining and Construction:

In heavy industries like mining and construction, large machinery such as excavators, bulldozers, and cranes utilize wheels and sprockets for propulsion and movement. Tracks with sprockets are commonly used in these applications for enhanced traction and stability.

7. Factory Automation:

In automated manufacturing processes, wheels and sprockets are employed in robotic arms and assembly line systems to control movement and manipulate objects with precision.

8. Renewable Energy:

In wind turbines, wheels and sprockets are used to convert the rotational motion of the blades into electrical energy by driving the generator.

These are just a few examples of the diverse applications of wheels and sprockets in machinery and mechanical systems. Their versatility, efficiency, and ability to provide mechanical advantage make them essential components in various industries.

China Custom Standard Heavy Duty Plastic Sprocket for Conveyor Belt Sprocket Wheel  China Custom Standard Heavy Duty Plastic Sprocket for Conveyor Belt Sprocket Wheel
editor by CX 2024-03-27

China wholesaler Harden Teeth DIN8187 ISO/R606 Standard Teeth Wheel Sprocket for Agricultural Industrial Machinery Transmission Belt Gearbox Parts General Duty Conveyor

Product Description

SPROCKET  1/2” X 5/16”  08B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

BASIC INFO.

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.50″, 3″

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1571, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

 

INSTALLATION AND USING

The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 
 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

wheel sprocket

Best Lubrication Practices for wheel sprocket Systems

Proper lubrication is essential for maintaining the efficiency and longevity of wheel sprocket systems. The lubrication practices can vary depending on the specific application and the environment in which the system operates. Here are some best practices for lubricating wheel sprocket systems:

  • Cleanliness: Before applying any lubricant, ensure that the wheel sprocket surfaces are clean and free from dirt, debris, and old lubricant residue. Cleaning the components helps prevent contaminants from mixing with the lubricant and causing additional wear.
  • Choose the Right Lubricant: Select a lubricant specifically designed for the wheel sprocket system. Consider factors such as load, speed, temperature, and environmental conditions when choosing the appropriate lubricant. Some systems may require grease, while others may need oil-based lubricants.
  • Apply Adequate Amount: Apply the lubricant in the right quantity to ensure proper coverage of the contacting surfaces. Too little lubricant may not provide sufficient protection, while too much can lead to excess heat and waste.
  • Regular Lubrication Schedule: Establish a maintenance schedule for lubrication based on the operating conditions of the system. In high-demand applications, more frequent lubrication may be necessary to prevent premature wear.
  • Monitor and Reapply: Regularly monitor the condition of the wheel sprocket system and observe any signs of inadequate lubrication, such as increased friction or unusual noise. Reapply lubricant as needed to maintain optimal performance.
  • Re-lubrication After Cleaning: If the wheel sprocket system is cleaned, ensure that fresh lubricant is applied after cleaning to restore the protective layer.
  • Consider Lubrication Type: Depending on the application, consider using dry lubricants or solid lubricants for environments where dust and dirt accumulation may be a concern.

It’s essential to follow the manufacturer’s recommendations and guidelines for lubrication. Additionally, consult with lubrication experts or equipment suppliers for specific recommendations based on your wheel sprocket system’s unique requirements.

wheel sprocket

Using wheel sprocket Assembly in Robotics and Automation

Yes, wheel sprocket assemblies are commonly used in robotics and automation systems to transmit power and facilitate movement. These systems offer several advantages for robotic applications:

  • Efficiency: wheel sprocket assemblies provide efficient power transmission, ensuring smooth and precise movement of robotic components.
  • Compact Design: The compact nature of sprockets and wheels allows for space-saving designs, making them ideal for robotic applications where space is limited.
  • Precision: Sprockets and wheels with accurate teeth profiles provide precise motion control, crucial for robotics and automation tasks that require high levels of accuracy.
  • Low Noise: Properly lubricated and maintained wheel sprocket systems generate minimal noise during operation, contributing to quieter robotic movements.
  • Customizability: wheel sprocket assemblies can be customized to suit specific robotic requirements, such as different gear ratios, sizes, and materials.
  • Multiple Configurations: Depending on the robotic application, different configurations like single or multiple sprockets, idler sprockets, or rack and pinion systems can be used.
  • High Load Capacity: Sprockets made from durable materials like steel can handle substantial loads, making them suitable for heavy-duty robotic tasks.

Examples of robotics and automation systems that commonly use wheel sprocket assemblies include:

  • Robotic Arms: wheel sprocket systems are utilized in robotic arms to control their movement and reach.
  • Automated Guided Vehicles (AGVs): AGVs use wheel sprocket assemblies for propulsion and steering, enabling them to navigate autonomously.
  • Conveyor Systems: In automated factories, conveyor belts are often driven by sprockets and wheels for efficient material handling.
  • Mobile Robots: Wheeled mobile robots use wheel sprocket assemblies to drive their wheels, enabling them to move in various directions.
  • Robot Grippers: wheel sprocket mechanisms can be integrated into robot grippers to facilitate gripping and handling objects.

The choice to use wheel sprocket assemblies in robotics and automation depends on the specific application requirements, load capacity, precision, and environmental conditions. By selecting the appropriate sprockets, wheels, and materials, engineers can ensure reliable and efficient robotic performance in a wide range of automated tasks.

wheel sprocket

Can a wheel sprocket System be Used in Bicycles and Other Vehicles?

Yes, a wheel sprocket system is commonly used in bicycles and various other vehicles. In bicycles, the wheel sprocket system is a fundamental part of the drivetrain, which transfers power from the rider’s legs to the wheels, propelling the bicycle forward.

The typical bicycle drivetrain consists of a chain, front sprockets (chainrings), rear sprockets (cassette), and the bicycle’s wheels. When the rider pedals the bicycle, the chain engages with the sprockets, and as a result, the rotational motion from the pedaling is transferred to the rear wheel.

The selection of sprocket sizes (number of teeth on chainrings and cassette) can affect the gear ratio, allowing cyclists to adjust their pedaling effort and speed to suit different terrains and riding conditions. Smaller sprockets provide easier pedaling for climbing steep hills, while larger sprockets offer higher speeds on flat or downhill sections.

Beyond bicycles, the wheel sprocket system is widely used in various other vehicles and machinery to transmit power and control speed. It can be found in motorcycles, mopeds, electric scooters, and even some small electric vehicles. Additionally, the wheel sprocket system is prevalent in industrial machinery, where precise speed control and torque transmission are essential.

The efficiency and reliability of the wheel sprocket system make it a versatile and practical choice for many vehicles and mechanical applications.

China wholesaler Harden Teeth DIN8187 ISO/R606 Standard Teeth Wheel Sprocket for Agricultural Industrial Machinery Transmission Belt Gearbox Parts General Duty Conveyor  China wholesaler Harden Teeth DIN8187 ISO/R606 Standard Teeth Wheel Sprocket for Agricultural Industrial Machinery Transmission Belt Gearbox Parts General Duty Conveyor
editor by CX 2023-09-27

China Hot selling Agricultural Machinery Belt Drive Stainless Steel Sprocket in China manufacturer

Product Description

Agricultural Machinery Belt Drive Stainless Steel Sprocket in China
 

Product Description

1. Produce strictly in accordance with ANSI or DIN standard dimension
2. Material: C45 steel / Stainless Steel 304 & 316
3. Standard: ANSI, DIN, JINS, ISO, Standard America or customer drawing
4. Pilot bore, finished bore, taper bore and special bore
5. Bright surface and high precision
6. Advanced heat treatment and surface treatment craft
7. Best quality and competitive price.
8. Welcome OEM / ODM
 

Product name  ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire resistant, Oil resistant, Heat resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

 

Detailed Photos

View more products,please click here…
 

Company Profile

 

Standard Or Nonstandard: Standard
Application: Machinery, Marine, Agricultural Machinery, Industry
Hardness: Hardened Tooth Surface
Material: Alloy Steel/Stainless Steel
Type: Sprocket
Sample: for Free
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket

How to Use Sprocket for Conversion Optimization

The sprocket is usually attached to the shaft with one or more set screws. These set screws are usually ANSI standard sizes. However, these standards are not always suitable for all applications. Therefore, it is important to find a supplier who understands the correct keyway size for a specific application.

Typical sprocket

Typical sprocket hardnesses range from 35 to 40 HRC, depending on the application. However, some applications require lower hardness levels. The hardness level is determined by the material used to manufacture the sprocket. Further tempering can further reduce the hardness level. For example, conveyor sprockets with long pitch line thicknesses may not require hardening.
Steel is the most commonly used material for standard sprockets. However, many types of materials can also be used. The material used to make the sprocket depends largely on the type of equipment and tools used to make the sprocket. Steel is the most common building material because of its versatility and hardness and its use in a variety of applications. Bronze is another common material used for sprockets, usually in non-magnetic environments.
Another common material used for sprockets is reinforced plastic. While sprockets may look similar to gears, the main difference is their teeth and their ability to interlock with the chain. This allows simple rotational movement of large equipment and machinery.
The number of teeth on the sprocket is measured according to the number specified by the standard. An example is the ISO-DIN standard. A typical sprocket has an odd number of teeth to prevent the teeth from wearing out and causing the chain to slip.
A typical sprocket has rollers on the bottom and teeth on the top. When the chain meshes with the sprockets, the rollers get caught on the teeth. The rollers then pull the strap back, removing the extra force. However, if the bottom half of the chain is slack, the rollers will sit on the teeth and the chain will jump forward one tooth.

Function

Sprocket is an important feature for optimizing the user experience of your website. It works by analyzing user behavior on your website and delivering personalized interactions at the right time. This feature can also help you increase the conversion rate of your website. In this article, we’ll explore how to use Sprocket for conversion optimization.
The easiest way to explain the function of a chainring is to imagine a bicycle. The large sprocket is mounted on the pedal axle of the bike, and it drives the chain, which in turn drives the small sprocket on the rear wheel. The same principle is used for motorcycles and some other motor vehicles.
sprocket

element

Sprocket assemblies are wheel-shaped assemblies that hold gears and other components in place. They allow precise rotation of large gears. They can be made of metal or reinforced plastic. Different designs are available to suit different applications. Here are some examples. Sprockets are used for heavy duty rollers.
The components 12 and 14 slide together in the axial direction relative to the drive shaft 18 . The protrusions 22 on one part fit into complementary shaped grooves on the other part. Usually, the two parts are the same, but they can be different. For example, jigsaw-shaped protrusions may fit into grooves in opposing portions.
Sprocket components are usually made of metal or reinforced plastic. They resemble gears due to their wheel-shaped design and teeth. However, sprockets interact with different types of chains. Most sprocket chain systems operate similarly to bicycle chain assemblies. To ensure proper performance, choose the correct one for your specific application.
Whether you’re buying sprockets for an electric car, bike, or construction project, make sure you choose the right sprocket. Sprockets are versatile. A single sprocket may have one or two teeth, while a triple sprocket may have two or more.
sprocket

Put on

Proper maintenance of your bicycle’s chain and sprockets is critical to the performance and safety of your bicycle. These components wear out over time and should be replaced in the correct order. A well-maintained bike can go from 20,000 to 30,000 miles on one set of components. Mileage depends on the quality of the chain and sprockets and the type of riding style. For your safety and the performance of your bike, it is recommended to replace these components every few thousand miles.
Identifying a worn sprocket is easy; you can easily notice when a sprocket’s teeth are cut off. A badly worn sprocket will be unusable and your chain will end up stuck between the teeth. If the chain is damaged by worn sprockets, you should replace the chain.
When a chain or sprocket needs to be replaced, it is important to ensure that the sprocket is properly lubricated. Oiling will make the chain and sprocket more efficient and reduce the risk of damage. A good rule of thumb is to use anti-rust oil to protect your bike from corrosion.
In order to maintain the sprocket, you should follow the manufacturer’s maintenance instructions. You must replace them in the correct order. The first step is to remove the old sprocket and discard it. Old sprockets cannot be mixed with new sprockets.
It is also important to replace the front and rear sprockets when returning the chain. You should also lubricate the chain to prevent rust. Before lubricating, you can clean the chain with a non-petroleum-based cleaner. Don’t use oil as it doesn’t protect the chain from water and is more viscous.

China Hot selling Agricultural Machinery Belt Drive Stainless Steel Sprocket in China     manufacturer China Hot selling Agricultural Machinery Belt Drive Stainless Steel Sprocket in China     manufacturer
editor by CX 2023-04-23

China 1108 Tapered locking Cast iron bushing for large compressor belt tensioner pulley Taper Lock Bush For Pulley gear timing sprocke bike chain sprocket

Relevant Industries: Manufacturing Plant, Equipment Restore Shops, Food & Beverage Manufacturing unit, Printing Shops, Design works , Spilne Sort CZPT Coupling With Jaw Spider Energy & Mining
Design Number: 1008,1108,1610,2012,251customized
Type: sleeve
Material: solid iron
Item title: taper sleeve
Coloration: Black
Packing: Wood Box
Certification: ISO 9001:2008
Surface remedy: Phosphating Black
Bush varieties: Roll
Method: Lathe Equipment
MOQ: a hundred
OEM: Acknowledge OEM
Support: Personalized OEM CNC Machining
Packaging Information: Wood box packaging following plastic packaging

HangZhou tianfengde business and Trade Co., JSB taper grid coupling Ltd
Please check with consumer provider very first about the dimensions of the internal hole

Company Info
Certifications
FAQQ1. Can I have a sample order ?
A: Sure, we welcome sample get to check and check out top quality.Combined samples are satisfactory.

Q2. Do you have any MOQ restrict order?
A: Lower MOQ, 1pc for sample examining is accessible

Q3. How do you ship the goods and how prolonged does it consider to arrive?
A: We typically ship by sea. It usually normally takes thirty days to get there. Airline shipping and delivery also optional.

This autumn. How to move forward an get ?
A: To start with permit us know your needs or software. Secondly We quotation in accordance to your demands or our recommendations.
Thirdly client confirms the samples and places deposit for formal purchase.
Fourthly We set up the creation.

Q5: Are you merchandise standard?
A: Our design is common, if you have distinct demand from customers, pls tell us.

Q6: Do you have desire to do our personal design and style things?
A: Completely! Lateefah Scorching Sale Inexpensive Adjustable Luminous Partners Connection Bracelet Handmade Rope Heart Star Key Bracelets We have large desire.

sprocket

Select sprocket

If you are in the market for a new sprocket, there are several factors to consider. There are two basic types of sprockets: roller sprockets and flat bore sprockets. Each has its pros and cons, so it’s important to choose the right one for your needs.

Roller sprocket

A roller sprocket is a mechanical device used to turn a rotating shaft. The size of the sprocket depends on its speed and the size of the chain. It has a wide range of applications. In addition, it is a versatile mechanical device that is an excellent choice for a variety of applications.
To understand the design of a roller sprocket, you can draw an outline on a piece of paper and draw the radius of the roller. This will help you understand how your teeth are configured. For example, if the teeth of the sprocket are round, the rollers will have a semi-circular profile. Likewise, if the roller is linear, the arc will be tangent to the base circle. This will ensure smooth movement of the rollers, while also transmitting rotational motion with high precision.
The length of the roller chain varies depending on the drive type. In adjustable center drives, the chain should be replaced at 3% elongation, while fixed center drives should be replaced at 15% elongation. You can also check the chain condition of the sprocket by pulling the chain out of the larger sprocket. If the chain is moving off the larger sprocket, it is time to replace the roller chain. Neglecting this aspect can result in damage to the sprocket.
The present invention relates to the manufacture of chain drive sprockets with a backlash-free mechanism. This is achieved by providing a center-to-center offset between the sprocket and roller connection lines. The resulting chain drive is backlash-free and allows full contact between the rollers and teeth.
Roller sprockets are critical components to ensure maximum efficiency and uptime. Its dimensions—bore bore, hub diameter, and through-hole length—are important. Additionally, the size of the roller sprockets varies according to the chain pitch, which is the distance between the centers of the roller pins.
sprocketRoller sprockets can be made of different materials, depending on their purpose. Most sprockets are made of metal or reinforced plastic. Some have bosses, some are shaped like wheels. Sprockets can be made of easily machined steel or resin. Different types of chains will engage different sprockets.
In addition to being used to mesh with chain drives, roller sprockets come in many different styles and bores. They are versatile and are often used with roller chains. Some are made of 1045CD carbon steel and have hardened teeth. Additionally, they are fully ANSI B29.1 compliant and some are manufactured for OEMs and aftermarket suppliers.

Flat hole sprocket

Flat bore sprockets are sprockets that are not specially machined. Flat bore sprockets do not have set screws, keyways or other special features. These features often require additional machining prior to installation. An important thing to keep in mind when buying a flat bore sprocket is the maximum bore. This refers to the maximum size that can be drilled without compromising structural integrity. Such measurements are usually listed in supplier directories.
Flat bore sprockets are available with standard bore or metric bore. Sprockets are used with specific chains. All chains are manufactured to a standard called “pitch”. The pitch is the distance from the center of one needle to the center of the next needle.sprocket

Steel split sprocket

Steel split sprockets can be used in a variety of industrial applications. These sprockets can be used in a range of applications, from forestry and mining to food and plastics processing. These types of sprockets are available in a variety of bores, tooth counts, and sprocket styles. Some types are also abrasion resistant.
There are several manufacturers that offer steel split sprockets. Made from high carbon steel, they are available in split, solid and removable rim versions. These sprockets are also suitable for hydraulic or pneumatic systems. Some manufacturers also offer service and support, including life cycle performance analysis, customer part numbers, and barcodes.
Split sprockets are ideal for applications where the drive shaft is large and multiple sprockets are mounted on the same shaft. For example, large conveyor chain sprockets may require the use of a crane to install and may result in increased downtime. Split sprockets also make installation in tight spaces easier. They can also be easily assembled without disassembling the shaft assembly.
Split sprockets are available in stock and custom sizes. small Stainless steel sprockets are also available, as are split flat top conveyor sprockets. They are commonly used in conveyors and robotic systems. Certain types of sprockets are suitable for specific applications, including woodworking, food processing, and woodworking.
Dimensions of split sprockets may vary by application. For example, split hub sprockets can range from one-half inch to one-tenth of an inch. Additionally, split hub sprockets have bolt circle diameters ranging from three-quarters to thirteen inches.

China 1108 Tapered locking Cast iron bushing for large compressor belt tensioner pulley Taper Lock Bush For Pulley gear timing sprocke     bike chain sprocketChina 1108 Tapered locking Cast iron bushing for large compressor belt tensioner pulley Taper Lock Bush For Pulley gear timing sprocke     bike chain sprocket
editor by CX 2023-04-21

China Link Belt Ls218hsl Crawler Crane Sprocket sprocket bar

Product Description

Crawler Crane Hyperlink Belt LS218HSL Push Tumbler 

one. Merchandise Detail 

Content 35SiMn
Heat Treatment method Complete quenching and tempering, surface area hardening
Condition Manufacturer New
Bundle Export Common Plywood Pallet / Crate
Guarantee 25, 15000, and many others.
RUSTON-BUCYRUS RB30, RB38, RB40, RB60 and so on.
TEREX DEMAG CC1500, CC1800, CC2000, CC2200, CC2400, CC2500, CC2600, CC2800
Terex/American HC50, HC60, HC80, HC110, HC165, HC275
AMERICAN American 9310, 9220, 9218, American 900 Serial, American7250, 7260, American 5299
LIMA 700HC
Liebherr LR1250, HS852HD, HS853HD, HS855HD, HS871HD, HS872HD, HS873HD, HS875HD, HS882HD, HS883HD, HS885HD
KINKI ISHIKO M50B
Website link-Belt LS108BS, LS108B, LS108BJ, LS138H, LS138HII, LS138HSL, LS208H, LS218H, LS218HSL 

4. Deal for Undercarriage Parts

5. Other Staff and Service

Product sales Team
About any enquiry or issue, we will reply with ideal provider as before long as feasible.

Technological innovation Crew
Specialist engineers with much more than twenty years’ practical encounter in undercarriage elements manufacturing, which will be beneficial for your crawler crane rebuilding and maintenance.

Supply Team
Set up the earliest shipment and offer with customs clearance timely.

Good quality Controller
We have numerous tests to make positive good high quality, this sort of as Chemical composition, Hardening and Tempering, Depth of hardening, ect. People screening guarantees that we could give the high-good quality crawler crane areas to each client.

US $500-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Type: Crawler
Application: Hoisting Machinery
Certification: CE
Condition: New
Technique: Casting
Warranty: 2500 Working Hours/1 Year

###

Samples:
US$ 1000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Material 35SiMn
Heat Treatment Whole quenching and tempering, surface hardening
Condition Brand New
Package Export Standard Plywood Pallet / Crate
Warranty 2500 Working Hours/ 1 Year
Min Order Quantity 1 Piece
Port of Loading Yantai, Qingdao, Dalian
Trade Terms EXW, FOB, CFR, CIF, DDU
Payment terms T/T; L/C; Western Union
Delivery Time Within 7-25 days after received payment

###

HITACHI KH70, KH100, KH100-1, KH100D, KH125, KH125-2, KH125-3, KH150, KH150-2, KH150-3, KH180, KH180-2, KH180-3, KH230, KH230-3, KH250HD, KH300, KH300-2, KH300-3, KH500-2, KH500-3, KH700-2, U106A, TH55, CX300, CX350, CX500, CX550, CX650, CX700, CX900, CX1000, CX1100, PD7, PD60FL, PD100, etc.
SUMITOMO SC350, SC400, SC500, SC500-2, SC550-2, SC650, SC650-2, SC650DD-2, SC650-3, SC700, SC700-2, SC800, SC800HD, SC1000, SC1000-2, SC1500, SC1500-2, LS13RH, LS78RH, LS78RM, LS78RH5, LS78RHD5, LS98, LS108RM, LS108RH5, LS110C, LS118RH3, LS118RH5, LS118RH, LS118RM, LS120RH5, LS138H, LS138RH5, LS138RHD5,LS208H, LS218H, LS218RH5, LS238RH2, LS238RH3, LS238RH5, LS248RH5, LS458HD, LS468HD, LS518, LS528, LS528-S, SD205, SD307, SD407, SD510, SD610, etc.
KOBELCO P&H60P, P&H70P, P&H75P, P&H100P, P&H315, P&H320, P&H325, P&H330, P&H335, P&H335AS, P&H345, P&H440, P&H550A, P&H550-1, P&H550-2, P&H5035, P&H5045, P&H5055, P&H5100, P&H7035, P&H7045, P&H7050, P&H7055, P&H7065, P&H7070, P&H7080, P&H7090, P&H7100, P&H7120, P&H7150, P&H7200, P&H7250, P&H7250-2, FS80, FS90, BM500, BM600, BM650, BM700, BM700HD, BM750, BM800, BM800HD, BM900, BM900HD, BM1200, CKS600, CKE600, CKE700, CKE800, CKE850, CKE900, CKE1000, CKE1100, CKE1350, CKE1800, CKE2500, CKE2500-2, CK850, CK1000, CK1000G, CK1600, CK2000-2, CK2500, SL6000, etc.
IHI CH350, CH500, CCH250W, CCH280W, CCH350, CCH350-D3, CCH400, CCH500, CCH500-2, CCH500-3, CCH500-T, CCH550, CCH650, CCH700, CCH800, CCH800-2, CCH1000, CCH1000-5, CCH1200, CCH1500, CCH1500E, CCH2500, CCH2800, DCH650, DCH700, DCH800, DCH1000, DCH1200, K300, K400A, K400B, K1000, etc.
NIPPON SHARYO DH300, DH308, DH350, DH400, DH408, DH500, DH508, DH600, DH608, DH608-120M, DH700, DHP70, DHP80, ED4000, ED5500, etc.
HITACHI SUMITOMO SCX300, SCX300-C, SCX400, SCX500, SCX700, SCX700-2, SCX800, SCX800-2, SCX900, SCX900-2, SCX1000, SCX1200, SCX1200-2, SCX1500, SCX1500-2, SCX2000, SCX2500, SCX2600, SCX2800-2, 218HSL, etc.
SANY SCC500B, SCC500C, SCC500D, SCC500E, SCC550C, SCC600C, SCC750C, SCC800C, SCC1000D, SCC1250, SCC1500CC, SCC1500D, SCC1800, SCC2600A, SCC3000WE, SCC4000E, SCC5000WE, SCC6500E, SCC7500, SCC8100, SCC8200, SCC8300, SCC10000, SCC16000, etc.
FUWA CC40, QUY35, QUY50, QUY50A, QUY50C, QUY50S, QUY55, QUY70, QUY70A, QUY80, QUY80A, QUY80B, QUY90, QUY100, QUY100A, QUY120, QUY130, QUY130A, QUY150, QUY150A, QUY150C, QUY250, QUY320, QUY400, QUY400A, QUY500, QUY650, QUY750, QUY1250, FZX36, FCC80B etc.
  QUY 38-350 ton
MANITOWOC M250, M999, 2250, 3900, 4000, 4100, 4100S, 4500, 4600S, 8500, 10000, 12000, 140000, 15000, etc.
RUSTON-BUCYRUS RB30, RB38, RB40, RB60 etc.
TEREX DEMAG CC1500, CC1800, CC2000, CC2200, CC2400, CC2500, CC2600, CC2800
Terex/American HC50, HC60, HC80, HC110, HC165, HC275
AMERICAN American 9310, 9220, 9218, American 900 Serial, American7250, 7260, American 5299
LIMA 700HC
Liebherr LR1250, HS852HD, HS853HD, HS855HD, HS871HD, HS872HD, HS873HD, HS875HD, HS882HD, HS883HD, HS885HD
KINKI ISHIKO M50B
Link-Belt LS108BS, LS108B, LS108BJ, LS138H, LS138HII, LS138HSL, LS208H, LS218H, LS218HSL 
US $500-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Type: Crawler
Application: Hoisting Machinery
Certification: CE
Condition: New
Technique: Casting
Warranty: 2500 Working Hours/1 Year

###

Samples:
US$ 1000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Material 35SiMn
Heat Treatment Whole quenching and tempering, surface hardening
Condition Brand New
Package Export Standard Plywood Pallet / Crate
Warranty 2500 Working Hours/ 1 Year
Min Order Quantity 1 Piece
Port of Loading Yantai, Qingdao, Dalian
Trade Terms EXW, FOB, CFR, CIF, DDU
Payment terms T/T; L/C; Western Union
Delivery Time Within 7-25 days after received payment

###

HITACHI KH70, KH100, KH100-1, KH100D, KH125, KH125-2, KH125-3, KH150, KH150-2, KH150-3, KH180, KH180-2, KH180-3, KH230, KH230-3, KH250HD, KH300, KH300-2, KH300-3, KH500-2, KH500-3, KH700-2, U106A, TH55, CX300, CX350, CX500, CX550, CX650, CX700, CX900, CX1000, CX1100, PD7, PD60FL, PD100, etc.
SUMITOMO SC350, SC400, SC500, SC500-2, SC550-2, SC650, SC650-2, SC650DD-2, SC650-3, SC700, SC700-2, SC800, SC800HD, SC1000, SC1000-2, SC1500, SC1500-2, LS13RH, LS78RH, LS78RM, LS78RH5, LS78RHD5, LS98, LS108RM, LS108RH5, LS110C, LS118RH3, LS118RH5, LS118RH, LS118RM, LS120RH5, LS138H, LS138RH5, LS138RHD5,LS208H, LS218H, LS218RH5, LS238RH2, LS238RH3, LS238RH5, LS248RH5, LS458HD, LS468HD, LS518, LS528, LS528-S, SD205, SD307, SD407, SD510, SD610, etc.
KOBELCO P&H60P, P&H70P, P&H75P, P&H100P, P&H315, P&H320, P&H325, P&H330, P&H335, P&H335AS, P&H345, P&H440, P&H550A, P&H550-1, P&H550-2, P&H5035, P&H5045, P&H5055, P&H5100, P&H7035, P&H7045, P&H7050, P&H7055, P&H7065, P&H7070, P&H7080, P&H7090, P&H7100, P&H7120, P&H7150, P&H7200, P&H7250, P&H7250-2, FS80, FS90, BM500, BM600, BM650, BM700, BM700HD, BM750, BM800, BM800HD, BM900, BM900HD, BM1200, CKS600, CKE600, CKE700, CKE800, CKE850, CKE900, CKE1000, CKE1100, CKE1350, CKE1800, CKE2500, CKE2500-2, CK850, CK1000, CK1000G, CK1600, CK2000-2, CK2500, SL6000, etc.
IHI CH350, CH500, CCH250W, CCH280W, CCH350, CCH350-D3, CCH400, CCH500, CCH500-2, CCH500-3, CCH500-T, CCH550, CCH650, CCH700, CCH800, CCH800-2, CCH1000, CCH1000-5, CCH1200, CCH1500, CCH1500E, CCH2500, CCH2800, DCH650, DCH700, DCH800, DCH1000, DCH1200, K300, K400A, K400B, K1000, etc.
NIPPON SHARYO DH300, DH308, DH350, DH400, DH408, DH500, DH508, DH600, DH608, DH608-120M, DH700, DHP70, DHP80, ED4000, ED5500, etc.
HITACHI SUMITOMO SCX300, SCX300-C, SCX400, SCX500, SCX700, SCX700-2, SCX800, SCX800-2, SCX900, SCX900-2, SCX1000, SCX1200, SCX1200-2, SCX1500, SCX1500-2, SCX2000, SCX2500, SCX2600, SCX2800-2, 218HSL, etc.
SANY SCC500B, SCC500C, SCC500D, SCC500E, SCC550C, SCC600C, SCC750C, SCC800C, SCC1000D, SCC1250, SCC1500CC, SCC1500D, SCC1800, SCC2600A, SCC3000WE, SCC4000E, SCC5000WE, SCC6500E, SCC7500, SCC8100, SCC8200, SCC8300, SCC10000, SCC16000, etc.
FUWA CC40, QUY35, QUY50, QUY50A, QUY50C, QUY50S, QUY55, QUY70, QUY70A, QUY80, QUY80A, QUY80B, QUY90, QUY100, QUY100A, QUY120, QUY130, QUY130A, QUY150, QUY150A, QUY150C, QUY250, QUY320, QUY400, QUY400A, QUY500, QUY650, QUY750, QUY1250, FZX36, FCC80B etc.
  QUY 38-350 ton
MANITOWOC M250, M999, 2250, 3900, 4000, 4100, 4100S, 4500, 4600S, 8500, 10000, 12000, 140000, 15000, etc.
RUSTON-BUCYRUS RB30, RB38, RB40, RB60 etc.
TEREX DEMAG CC1500, CC1800, CC2000, CC2200, CC2400, CC2500, CC2600, CC2800
Terex/American HC50, HC60, HC80, HC110, HC165, HC275
AMERICAN American 9310, 9220, 9218, American 900 Serial, American7250, 7260, American 5299
LIMA 700HC
Liebherr LR1250, HS852HD, HS853HD, HS855HD, HS871HD, HS872HD, HS873HD, HS875HD, HS882HD, HS883HD, HS885HD
KINKI ISHIKO M50B
Link-Belt LS108BS, LS108B, LS108BJ, LS138H, LS138HII, LS138HSL, LS208H, LS218H, LS218HSL 

How to Identify a Sprocket

When choosing a sprocket, you have several options. There are several types, each with unique features. In this article, we’ll discuss how to identify sprockets, and how to replace worn or damaged sprockets.
sprocket

buy sprockets

When building a bicycle, sprockets are an important part of the drivetrain. Unfortunately, they’re hard to find outside of places like CZPT. Fortunately, there are some easy ways to find the right sprocket for your bike.
The first thing to consider is what kind of sprocket you need. Choosing the wrong sprocket can damage your equipment or cause it to fail prematurely. While sprockets come in a variety of sizes, there are some key features that can help you find the right one.
There are two basic types of sprockets. You can choose one made of steel or aluminum, or a combination of both. Most sprockets are made of steel, but there are also new aluminum sprockets that are similar to steel and last as long as steel. No matter which material you choose, it’s important to choose a reputable manufacturer with regular maintenance.
Buying sprockets that match your chain is another way to ensure proper installation. The chain goes through the sprockets thousands of times per minute, so the teeth eventually wear out. Poorly maintained sprockets can also cause “hook” teeth, which will cause your chain to stretch to the point where you can no longer adjust it.

Identify sprockets

One of the most common bicycle parts is the sprocket, which can be identified by its width and number of teeth. A single sprocket has one tooth along its circumference, while a double sprocket has two rows of teeth. Sprockets are also known by different names, including single, double, triple, and quadruple sprockets.
Roller sprockets are another type of sprocket. It runs along a chain of rollers connected by pins. It fits into the gap between the rollers in the chain to transfer kinetic energy. There are two basic styles of roller sprockets: single pitch and double pitch. Single-pitch sprockets are small and fit snugly against the equipment, while double-pitch sprockets are larger and require more thickness to support the weight.
Checking a sprocket is easy if you know how to count teeth. A simple caliper will allow you to easily find sprockets with worn teeth. Calipers also allow you to measure the hole of the sprocket, which is the inside diameter of the sprocket.
Another way to tell if a sprocket is worn is to visually inspect the sprocket. Worn sprockets can cause the chain to bounce, putting more pressure on the bearings and accelerating wear. It is also important to check the alignment of the sprockets. If it’s off center, it probably means the chain needs to be replaced.
sprocket

Replace sprocket

If you want to maintain your bike, it’s a good idea to replace your chain and sprockets regularly. If you don’t, you may have a problem that will only get worse. Worn chains can also make noise, so it’s a good idea to check them regularly. Also, you should lubricate and tighten them regularly, especially when they reach their maximum mileage.
First, you need to determine the size of the chain. Usually, you’ll find it in the manual. Common sizes are 520, 525, and 530. The first number refers to the pitch of the chain, which is the distance between the rivets, while the second number refers to the width of the sprocket. For example, a 20-tooth sprocket is two and a half inches wide.
Replacing a sprocket is a relatively simple process. Be sure to clean the bike and apply wheel bearing grease before tackling the task. Next, remove the old chain from the rear wheel. Some bikes may have clevises or side panels that need to be removed. A flat-blade screwdriver works well for this problem. You can also use the Broken Links tool to remove split links.
You can also install new sprockets on your bike. After removing the old one, be sure to follow the manufacturer’s instructions for chain and sprocket size. You should also tighten the sprocket nut to the manufacturer’s torque setting. Once you’ve done this, be sure to check the chain tension to make sure it’s not too loose or too tight.

Replace worn chains

To prevent damage to the chain, the chain must be replaced regularly. It’s prone to wear and tear, but you can extend the life of your bike’s chain with a few simple steps. One of the steps is to lift the rear wheel of the bike so you can run the new chain through the rear derailleur. This will make the task easier because your bike won’t be lying on the floor. If you don’t have a bike rack, you can use cinder blocks, wood, or boxes to support your bike rack.
The most obvious sign is yIf your chain bounces under load, our chainrings need to be replaced. Using a chain gauge will let you know when you need a new chain. Chain gauges usually consist of two sides and are used to measure the amount of wear on the chain under a given load. You can check the gauge by placing it on the chain and making sure it sinks into the chain.
First, you need to delete the old chain. Some older chains use uniform pins that you can use to replace them. Make sure to get a chain that is the same length as the old one. Also, pay attention to the type of drivetrain your bike has. For example, if it has a rear derailleur, you will need a chain that matches the same drivetrain.

Check the sprocket for rust

One of the best ways to check your bike for rust is to look for surface rust. This is the first sign that the metal is starting to oxidize. Using a steel brush to remove surface rust is a good idea, but be sure to wear safety glasses. You can also clean the sprockets with WD-40 or kerosene.
Another indicator that a sprocket needs to be replaced is excessive wear. This may be caused by foreign objects conveyed by the chain. It may also be necessary to center the chain and drive sprocket and install guide rollers. Other signs of sprocket rust include excessive vibration due to improperly machined axle holes or a bent or bent chain.
You should also look for any kinks in the chain. If so, you may need to replace the chain. Also, look for any rust spots and excess grease. Also, you should check the sprockets to make sure they are properly aligned.
Besides rust, another sign of rust is the chain jumping out of the sprocket. This can cause the chain to jam and cause your bike to slip. This situation is also dangerous for you and other drivers.
sprocket

Replace worn sprockets

You can repair your bike’s gears by replacing the sprockets. You should always check the chain for any signs of wear. In the case of a worn sprocket, you should check the teeth, which are usually tall and hooked.
If the sprocket is curled, skewed, or uneven, the sprocket is worn and needs to be replaced. If the sprockets are not replaced, they will wear out the chain very quickly. Chains should be replaced as soon as they show signs of excessive wear.
To replace a worn sprocket, you must first remove the old rear sprocket. To do this, loosen the bolts that hold the sprocket in place. You should also clean the hub surface with steel wool to reduce corrosion and wear.
Worn sprockets have worn teeth that keep the roller chain from slipping. This can cause the chain to climb up the sprockets and make a lot of noise. In addition to noise, chains can stick to worn sprockets and damage sprockets and chain. Don’t wait until the chain is out of control to fix it.
After the sprocket is removed, the rear sprocket and drive sprocket can be replaced. It is important to check the alignment of the sprockets, as incorrect alignment can cause premature chain wear. Proper alignment will distribute the load evenly across the entire width of the chain, extending the life of the chain. You can check the sprocket with a ruler or laser sight tool.

China Link Belt Ls218hsl Crawler Crane Sprocket     sprocket barChina Link Belt Ls218hsl Crawler Crane Sprocket     sprocket bar
editor by czh 2023-01-26

China Sprocket for 1100 Series Plastic Modular Belt (1-1100) with high quality

Merchandise Description

This variety of sprocket is ideal for the plastic modular belt 1100 collection.

Sprockets
Loafer Wheels
Plastic Modular Belts
Conveyor Belts
Chain Sprocket
 

Sprocket sort Enamel Pitch Diameter (mm) Outside the house Diameter (mm) Bore (mm)
one-1100-sixteen-40×40 sixteen 78.74 seventy nine. 40×40
one-1100-24-40×40 24 116.eighty four 119. 40×40
1-1100-32-40×40 32 154.94 157. 40×40

 

US $6
/ Piece
|
10 Pieces

(Min. Order)

###

Type: 1-1100
Material: POM
Teeth: 16/24/32
Transport Package: depend on customers′ requirement
Specification: 1100SPT
Trademark: tuoxin

###

Customization:

###

Sprocket type Teeth Pitch Diameter (mm) Outside Diameter (mm) Bore (mm)
1-1100-16-40×40 16 78.74 79.0 40×40
1-1100-24-40×40 24 116.84 119.0 40×40
1-1100-32-40×40 32 154.94 157.0 40×40
US $6
/ Piece
|
10 Pieces

(Min. Order)

###

Type: 1-1100
Material: POM
Teeth: 16/24/32
Transport Package: depend on customers′ requirement
Specification: 1100SPT
Trademark: tuoxin

###

Customization:

###

Sprocket type Teeth Pitch Diameter (mm) Outside Diameter (mm) Bore (mm)
1-1100-16-40×40 16 78.74 79.0 40×40
1-1100-24-40×40 24 116.84 119.0 40×40
1-1100-32-40×40 32 154.94 157.0 40×40

How to Identify a Sprocket

When choosing a sprocket, you have several options. There are several types, each with unique features. In this article, we’ll discuss how to identify sprockets, and how to replace worn or damaged sprockets.
sprocket

buy sprockets

When building a bicycle, sprockets are an important part of the drivetrain. Unfortunately, they’re hard to find outside of places like CZPT. Fortunately, there are some easy ways to find the right sprocket for your bike.
The first thing to consider is what kind of sprocket you need. Choosing the wrong sprocket can damage your equipment or cause it to fail prematurely. While sprockets come in a variety of sizes, there are some key features that can help you find the right one.
There are two basic types of sprockets. You can choose one made of steel or aluminum, or a combination of both. Most sprockets are made of steel, but there are also new aluminum sprockets that are similar to steel and last as long as steel. No matter which material you choose, it’s important to choose a reputable manufacturer with regular maintenance.
Buying sprockets that match your chain is another way to ensure proper installation. The chain goes through the sprockets thousands of times per minute, so the teeth eventually wear out. Poorly maintained sprockets can also cause “hook” teeth, which will cause your chain to stretch to the point where you can no longer adjust it.

Identify sprockets

One of the most common bicycle parts is the sprocket, which can be identified by its width and number of teeth. A single sprocket has one tooth along its circumference, while a double sprocket has two rows of teeth. Sprockets are also known by different names, including single, double, triple, and quadruple sprockets.
Roller sprockets are another type of sprocket. It runs along a chain of rollers connected by pins. It fits into the gap between the rollers in the chain to transfer kinetic energy. There are two basic styles of roller sprockets: single pitch and double pitch. Single-pitch sprockets are small and fit snugly against the equipment, while double-pitch sprockets are larger and require more thickness to support the weight.
Checking a sprocket is easy if you know how to count teeth. A simple caliper will allow you to easily find sprockets with worn teeth. Calipers also allow you to measure the hole of the sprocket, which is the inside diameter of the sprocket.
Another way to tell if a sprocket is worn is to visually inspect the sprocket. Worn sprockets can cause the chain to bounce, putting more pressure on the bearings and accelerating wear. It is also important to check the alignment of the sprockets. If it’s off center, it probably means the chain needs to be replaced.
sprocket

Replace sprocket

If you want to maintain your bike, it’s a good idea to replace your chain and sprockets regularly. If you don’t, you may have a problem that will only get worse. Worn chains can also make noise, so it’s a good idea to check them regularly. Also, you should lubricate and tighten them regularly, especially when they reach their maximum mileage.
First, you need to determine the size of the chain. Usually, you’ll find it in the manual. Common sizes are 520, 525, and 530. The first number refers to the pitch of the chain, which is the distance between the rivets, while the second number refers to the width of the sprocket. For example, a 20-tooth sprocket is two and a half inches wide.
Replacing a sprocket is a relatively simple process. Be sure to clean the bike and apply wheel bearing grease before tackling the task. Next, remove the old chain from the rear wheel. Some bikes may have clevises or side panels that need to be removed. A flat-blade screwdriver works well for this problem. You can also use the Broken Links tool to remove split links.
You can also install new sprockets on your bike. After removing the old one, be sure to follow the manufacturer’s instructions for chain and sprocket size. You should also tighten the sprocket nut to the manufacturer’s torque setting. Once you’ve done this, be sure to check the chain tension to make sure it’s not too loose or too tight.

Replace worn chains

To prevent damage to the chain, the chain must be replaced regularly. It’s prone to wear and tear, but you can extend the life of your bike’s chain with a few simple steps. One of the steps is to lift the rear wheel of the bike so you can run the new chain through the rear derailleur. This will make the task easier because your bike won’t be lying on the floor. If you don’t have a bike rack, you can use cinder blocks, wood, or boxes to support your bike rack.
The most obvious sign is yIf your chain bounces under load, our chainrings need to be replaced. Using a chain gauge will let you know when you need a new chain. Chain gauges usually consist of two sides and are used to measure the amount of wear on the chain under a given load. You can check the gauge by placing it on the chain and making sure it sinks into the chain.
First, you need to delete the old chain. Some older chains use uniform pins that you can use to replace them. Make sure to get a chain that is the same length as the old one. Also, pay attention to the type of drivetrain your bike has. For example, if it has a rear derailleur, you will need a chain that matches the same drivetrain.

Check the sprocket for rust

One of the best ways to check your bike for rust is to look for surface rust. This is the first sign that the metal is starting to oxidize. Using a steel brush to remove surface rust is a good idea, but be sure to wear safety glasses. You can also clean the sprockets with WD-40 or kerosene.
Another indicator that a sprocket needs to be replaced is excessive wear. This may be caused by foreign objects conveyed by the chain. It may also be necessary to center the chain and drive sprocket and install guide rollers. Other signs of sprocket rust include excessive vibration due to improperly machined axle holes or a bent or bent chain.
You should also look for any kinks in the chain. If so, you may need to replace the chain. Also, look for any rust spots and excess grease. Also, you should check the sprockets to make sure they are properly aligned.
Besides rust, another sign of rust is the chain jumping out of the sprocket. This can cause the chain to jam and cause your bike to slip. This situation is also dangerous for you and other drivers.
sprocket

Replace worn sprockets

You can repair your bike’s gears by replacing the sprockets. You should always check the chain for any signs of wear. In the case of a worn sprocket, you should check the teeth, which are usually tall and hooked.
If the sprocket is curled, skewed, or uneven, the sprocket is worn and needs to be replaced. If the sprockets are not replaced, they will wear out the chain very quickly. Chains should be replaced as soon as they show signs of excessive wear.
To replace a worn sprocket, you must first remove the old rear sprocket. To do this, loosen the bolts that hold the sprocket in place. You should also clean the hub surface with steel wool to reduce corrosion and wear.
Worn sprockets have worn teeth that keep the roller chain from slipping. This can cause the chain to climb up the sprockets and make a lot of noise. In addition to noise, chains can stick to worn sprockets and damage sprockets and chain. Don’t wait until the chain is out of control to fix it.
After the sprocket is removed, the rear sprocket and drive sprocket can be replaced. It is important to check the alignment of the sprockets, as incorrect alignment can cause premature chain wear. Proper alignment will distribute the load evenly across the entire width of the chain, extending the life of the chain. You can check the sprocket with a ruler or laser sight tool.

China Sprocket for 1100 Series Plastic Modular Belt (1-1100)     with high quality China Sprocket for 1100 Series Plastic Modular Belt (1-1100)     with high quality
editor by czh 2022-12-24

China China Manufacturer Good Quality Stainless Steel Roller Chain Conveyor Belt Sprocket wholesaler

Merchandise Description

Stainless Metal Roller Chain Sprocket (All Types)

Information ABOUT CZPT CHAIN 

Merchandise Description

Product Name Chain Sprockets
Procedure  Forging, hobbing, precision machining, and so on.
Certifications  ISO 9001: 2008, GB/T19001-2000IDT, Test Report
Regular  GB1244-eighty five, DIN8187,8188, OEM, ANSI or DIN
Surface area Therapy  Blacken or Galvanized as You Essential
Material  Stainless steel, carbon steel, aluminum, copper, brass
Heat Therapy  45 – 55 HRC
Packaging  Plastic bag+paper situation+wood pallet
Apps Creating Materials Outlets, Equipment, Industrial, etc.

Much more Goods

Benefit

Specifics ABOUT CZPT CHAIN 

Exhibition

Certifications

Workshop

Software

Packaging Particulars & Shipping

FAQ      

1. Are you a maker or trade Firm?
We are a factory founded in 1997 with a trade staff for global service.

2. What conditions of payment do you typically use?
T/T 30% deposit and 70% towards document, Western Union, L/C at sight

3. What is your guide time for your products?
Typically 35 days following confirmed get. thirty times could be offered in the lower period for some objects (for the duration of May to July), and 45 times in the course of the new calendar year and hot season ( Jan to March).
4. Samples

For customers who need sample affirmation ahead of purchasing, you should bear in mind that the subsequent coverage will be adopted:
one) All samples are free of demand with a highest price not exceeding USD one hundred.
2) The courier expense for the very first-time sample sending will be charged by the consignee. We will send the samples with freight to be collected. So you should inform your account with FedEx, UPS, DHL, or TNT so that we can move forward immediately.
three) The first-time courier cost will be entirely deducted from the contract worth of the demo cooperation.

US $0.52-14
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery
Hardness: Hardened Tooth Surface
Manufacturing Method: Cast Gear
Toothed Portion Shape: Spur Gear
Material: Stainless Steel

###

Customization:

###

Product Name Chain Sprockets
Process  Forging, hobbing, precision machining, etc.
Certifications  ISO 9001: 2008, GB/T19001-2000IDT, Test Report
Standard  GB1244-85, DIN8187,8188, OEM, ANSI or DIN
Surface Treatment  Blacken or Galvanized as You Required
Material  Stainless steel, carbon steel, aluminum, copper, brass
Heat Treatment  45 – 55 HRC
Packaging  Plastic bag+paper case+wooden pallet
Applications Building Material Shops, Machinery, Industrial, etc.
US $0.52-14
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery
Hardness: Hardened Tooth Surface
Manufacturing Method: Cast Gear
Toothed Portion Shape: Spur Gear
Material: Stainless Steel

###

Customization:

###

Product Name Chain Sprockets
Process  Forging, hobbing, precision machining, etc.
Certifications  ISO 9001: 2008, GB/T19001-2000IDT, Test Report
Standard  GB1244-85, DIN8187,8188, OEM, ANSI or DIN
Surface Treatment  Blacken or Galvanized as You Required
Material  Stainless steel, carbon steel, aluminum, copper, brass
Heat Treatment  45 – 55 HRC
Packaging  Plastic bag+paper case+wooden pallet
Applications Building Material Shops, Machinery, Industrial, etc.

Choosing the Right Chain Sprocket For Your Bike

When deciding which chain sprocket to buy, you should be aware of how they fit on the bike. These sprockets are often secured to the bike’s shaft by either one or more set screws. ANSI standards for sprocket keyways provide the proper dimensions for a given shaft diameter. However, they aren’t universal and might not apply to all applications. As a result, it is important to consult a supplier who is familiar with the exact keyway dimensions.
sprocket

Roller chain sprocket

A Roller chain sprocket is a gear with toothed rollers. The tooth profile determines the arc length of the roller. A roller with an undercut tooth profile will not transmit movement properly. For this reason, the pitch line of the roller should be equal to the incremental circle length (r) divided by the number of teeth.
The chain sprocket is available in various types. They can be used in conveyor chains. They are usually available as ready-to-mount units. Finished bores and wide hubs are available for mounting them. They are also available with a roller-bearing design.
The teeth of sprocket wheels are derived from the involute-trochoid curve. In order to engage with these teeth, the roller chain must be sufficiently accurate to avoid backlash. However, conventional roller chains can also engage with these teeth. However, this cannot eliminate backlash completely. This is why the invention provides means for reducing the friction between the teeth and the roller. This also increases the life span of the roller-and-sprocket transmission.
In terms of standards, the ANSI standard is widely used in the industry. It accounts for nearly 15% of the market in Europe and holds an advantage over the ISO standards. In North America, manufacturers of sprockets follow the ANSI code B 29.1. The ANSI code provides clear design guidelines and allows for interchangeability among different types.
There are many considerations to make when selecting a sprocket. A key factor is the transmission input. For example, if the transmission has a high horsepower, the center distance between the large and small sprockets is smaller. To compensate for this, a chain with a smaller pitch may be appropriate. Also, if the transmission has a high horsepower ratio, a multiple-strand drive is a viable option.
If you’re looking for a quality roller chain sprocket, you should check out MDS. They stock a wide range of types and sizes for a variety of industrial machinery.

Gap-tooth sprocket

A gap-tooth chain sprocket has tooth-head heights greater than the ISO tooth form height. This ensures that the pins and rollers meet at a point near the tooth head, and eliminates pulsating movement and intermittent changes in speed.
The front and rear surfaces of the sprocket are convex arcs, with radii equal to each other and the center of the tooth gap bottom. This allows for a uniform pitch and reduced friction. The tooth-face height of a gap-tooth chain sprocket is equal to the pitch of the chain, while the radii of its tooth-faces are larger than that of an ISO tooth-form.
One form of gap-tooth chain sprocket has four teeth at regular intervals. The teeth are interconnected by arc-shaped tooth gap bottoms. The resulting chain pitch is called the chain pitch. The gap-tooth sprocket can be used on various types of wheels.
ISO 606 1994 (E) defines the standard chain length, while Japanese Industrial Standards (JIS B 1801) define the standard tooth form. The ISO and Japanese Industrial Standards define two different tooth forms, namely S-tooth and U-tooth. The ISO and Japanese Industrial Standard tooth forms have different tooth pitches, but the root diameter of both forms is the same. The distance between each tooth is measured from the pitch polygon.
The tooth gap bottom circle of the gap-tooth sprocket gradually contacts the surface of the front tooth in the opposite side of the tooth gap. As this process continues, the tooth surface of the gap-tooth sprocket moves closer to the tooth head. This reduces the impact, which results in less noise.
The gap-tooth chain sprocket is an ideal solution for many applications. It allows the chain to disengage easily. With the same frequency, the teeth of the sprocket also help in regulating vibration. A sprocket with short teeth will be easier to disengage when necessary.
Another popular style of gap-tooth chain sprocket is the random polygon 64. The random polygon is a quadrilateral. Each vertex of the quadrilateral is assigned to one of the four consecutive pins on the uniform chain. The four consecutive pins are aligned in a gap-tooth pattern.
sprocket

Steel split sprocket

Split sprockets are perfect for large portions of the drive system, as they can be installed without disassembling the entire shaft assembly. These sprockets are also useful in applications where there is limited workspace. They can be installed without disassembling the entire shaft assembly, minimizing the risk of damage to the conveyor system and reducing downtime.
There are several different types of split sprockets, including mat chains and table chains. Each type differs in bore diameter, number of teeth, block body style, and abrasion resistance. Some are made from steel, while others are made from a non-split material.
Split sprockets are available from many manufacturers. Typically, the split sprockets are made with two pieces of steel, which are then joined together again. This assembly technique is a cost-effective way to mount sprockets on a shaft. These sprockets can be stocked in multiple sizes and keyways.
Stainless Steel sprockets are available in stock and custom configurations. They are designed to last for years to come. These sprockets are suitable for conveyors, power transmission systems, and robotics. In addition, these sprockets offer heightened quality and durability. Some of these sprockets feature a bevel or spiral bevel gear, while others are made from helical gear.
Split sprockets are available in a variety of sizes. For instance, the RCS-03 is a plain bore type, while the RCS-04 is a finished bore type. Split sprockets are available with a split taper bushed design. They are also available with either single or multiple strands.
sprocket

Double-duty sprocket

If you are looking for a heavy-duty chain sprocket, you have many choices. They come in different sizes, shapes, and materials. Some have wide teeth while others have narrow teeth. You should choose a sprocket that has the correct tooth pitch for your chain’s pitch diameter. You should also pay attention to the sprocket’s bore, or the hole in its center through which the drive shaft passes.
The type of transmission will also determine the type of sprocket you need. High-power transmissions, for example, require higher-pitch sprockets than lower-pitch models. To make sure that you choose the right sprocket for your application, check the horsepower and pitch of your transmission. If you have a low-pitch transmission, choose a smaller chain pitch. High-horsepower transmissions may also require multiple-strand drive.
There are different standards for sprockets, but ANSI standards are widely accepted. For instance, ANSI code B 29.1 requires sprockets to have two teeth per chain pitch, whereas ISO standards call for three. The double-duty sprocket, on the other hand, engages every other tooth. This helps the sprocket’s lifespan.
There are many different sprockets, and each has different performance characteristics. Generally, sprockets are made of metal or reinforced plastic and are similar to bicycle gears in their wheel-shaped design. Different types of chain sprockets have different teeth and work with different types of chains. The design of the chain and sprocket also determines the type of sprocket needed.
One popular type of double-duty sprocket is the steel-split sprocket. Its pitch is half the pitch of the chain and is usually referred to as a ‘double-duty’ sprocket. It is often used for heavy-duty purposes, as it distributes the load evenly on the chain.
While sprockets come in different tooth pitches and diameters, the recommended number of teeth is 17. The more teeth on the sprocket, the longer it will last. The height of the teeth is also important. A sprocket with more teeth will increase the life of the chain.

China China Manufacturer Good Quality Stainless Steel Roller Chain Conveyor Belt Sprocket     wholesaler China China Manufacturer Good Quality Stainless Steel Roller Chain Conveyor Belt Sprocket     wholesaler
editor by czh 2022-12-20

China Tl26-8m-30 Taper Locking Timing Belt Sprocket sprocket chart

Item Description

CZPT Machinery gives a broad selection of higher good quality Timing Belt Pulleys and Toothed Bars/ Timing Bars.  Standard and non-regular pulleys in accordance to drawings are available.

 
Sorts of content:
  1. AlCuMgPb 6061 6082 Aluminum Timing Pulley
  2. C45E 1045 S45C Carbon Steel Timing Pulley
  3. GG25 HT250 Solid Iron Timing Pulley
  4. SUS303 SUS304 AISI431 Stainless Steel Timing Pulley
  5. Other material on need, such as cooper,  bronze and plastic
 
Types of floor treatment
 1.  Anodized floor -Aluminum Pulleys
 2.  Hard anodized area — Aluminum Pulleys
 3.  Black Oxidized area — Steel Pulleys
 4. Zinc plated surface — Steel Pulleys
 5. Chromate surface area — Steel Pulleys Forged Iron Pulleys
 6. Nickel plated area –Steel Pulleys Forged Iron Pulleys
 
Sorts of enamel profile

Enamel Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL .08″(2.032MM)
XL 1/5″(5.08MM)
L three/8″(9.525MM)
H one/2″(twelve.7MM)
XH seven/8″(22.225MM)
XXH one 1/4″(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

 
Sorts of pitches and dimensions

Imperial Inch Timing Belt Pulley,
one.     Pilot Bore MXL571 for 6.35mm timing belt enamel variety from sixteen to seventy two
two.  Pilot Bore XL037 for 9.53mm timing belt teeth variety from 10 to seventy two
3.  Pilot Bore, Taper Bore L050 for 12.7mm timing belt tooth amount from 10 to a hundred and twenty
four.  Pilot Bore, Taper Bore L075 for 19.05mm timing belt enamel amount from 10 to a hundred and twenty
5.  Pilot Bore, Taper Bore L100 for twenty five.4mm timing belt teeth variety from ten to 120
six.  Pilot Bore, Taper Bore H075 for 19.05mm timing belt enamel number from fourteen to fifty
seven.  Pilot Bore, Taper Bore H100 for 25.4mm timing belt teeth variety from 14 to 156
8.  Pilot Bore, Taper Bore H150 for 38.1mm timing belt teeth quantity from fourteen to 156
nine.  Pilot Bore, Taper Bore H200 for 50.8mm timing belt enamel number from fourteen to 156
10.  Pilot Bore, Taper Bore H300 for 76.2mm timing belt tooth amount from 14 to 156
eleven.  Taper Bore XH200 for 50.8mm timing belt enamel amount from 18 to a hundred and twenty
12.  Taper Bore XH300 for 76.2mm timing belt enamel variety from 18 to 120
13.  Taper Bore XH400 for a hundred and one.6mm timing belt teeth number from 18 to a hundred and twenty

Metric Timing Belt Pulley T and AT
1.  Pilot Bore T2.5-16 for 6mm timing belt enamel quantity from 12 to 60 
2.   Pilot Bore T5-21 for 10mm timing belt teeth number from ten to 60 
three.   Pilot Bore T5-27 for 16mm timing belt tooth number from 10 to 60 
4.   Pilot Bore T5-36 for 25mm timing belt tooth quantity from 10 to 60 
5.   Pilot Bore T10-31 for 16mm timing belt tooth quantity from 12 to 60 
six.   Pilot Bore T10-40 for 25mm timing belt teeth variety from twelve to 60 
7.   Pilot Bore T10-47 for 32mm timing belt teeth amount from eighteen to 60 
eight.   Pilot Bore T10-66 for 50mm timing belt enamel amount from eighteen to 60
9.  Pilot Bore AT5-21 for 10mm timing belt enamel number from 12 to 60
ten. Pilot Bore AT5-27 for 16mm timing belt tooth amount from 12 to 60
eleven. Pilot Bore AT5-36 for 25mm timing belt enamel quantity from twelve to 60 
12. Pilot Bore AT10-31 for 16mm timing belt teeth amount from 15 to 60 
thirteen. Pilot Bore AT10-40 for 25mm timing belt teeth amount from 15 to 60 
14. Pilot Bore AT10-47 for 32mm timing belt enamel amount from 18 to 60 
15. Pilot Bore AT10-66 for 50mm timing belt tooth quantity from eighteen to 60
  
Metric Timing Belt Pulley HTD3M, 5M, 8M, 14M 
1.  HTD3M-06 3M-09 3M-fifteen tooth variety from ten to 72 
two.  HTD5M-09 5M-fifteen 5M-25 teeth amount from 12 to 72 
three.  HTD8M-twenty 8M-thirty 8M-fifty 8M-eighty five teeth variety from 22 to 192 
four.  HTD14M-forty 14M-fifty five 14M-eighty five 14M-one hundred fifteen 14M-a hundred and seventy enamel quantity from 28-216 
five.  Taper Bore HTD5M-fifteen 8M-20 8M-30 8M-50 8M-eighty five 14M-forty 14M-55 14M-eighty five
         14M-one hundred fifteen 14M-170

Metric Timing Belt Pulleys for Poly Chain GT2 Belts 
one.      PCGT8M-twelve PCGT8M-21 PCGT8M-36 PCGT8M-62 
2.      PCGT14M-twenty PCGT14M-37 PCGT14M-68 PCGT14M-ninety PCGT14M-125

Electrical power Grip CZPT Tooth/ PGGT 2GT, 3GT and 5GT 
1. 2GT-06, 2GT-09 for timing belt width 6mm and 9mm 
2. 3GT-09, 3GT-15 for timing belt width 9mm and 15mm 
3. 5GT-fifteen, 5GT-25 for timing belt width 15mm and 25mm

OMEGA RPP HTD Timing Pulleys 
one.   RPP3M-06 3M-09 3M-fifteen tooth number from 10 to 72 
two.   RPP5M-09 5M-15 5M-25 tooth number from twelve to 72 
three.   RPP8M-twenty 8M-thirty 8M-50 8M-eighty five teeth quantity from 22 to 192 
four.   RPP14M-40 14M-fifty five 14M-eighty five 14M-one hundred fifteen 14M-one hundred seventy tooth variety from 28-216 
five.  Taper Bore RPP5M-15 8M-twenty 8M-30 8M-fifty 8M-eighty five 14M-forty 14M-fifty five 14M-eighty five
     14M-a hundred and fifteen 14M-170.

US $1.3
/ Piece
|
1 Piece

(Min. Order)

###

Pulley Sizes: Htd 5m
Manufacturing Process: Sawing
Material: Steel
Surface Treatment: Black Oxidizing
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Aluminum: White Anodized

###

Samples:
US$ 3/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL 0.08"(2.032MM)
XL 1/5"(5.08MM)
L 3/8"(9.525MM)
H 1/2"(12.7MM)
XH 7/8"(22.225MM)
XXH 1 1/4"(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M
US $1.3
/ Piece
|
1 Piece

(Min. Order)

###

Pulley Sizes: Htd 5m
Manufacturing Process: Sawing
Material: Steel
Surface Treatment: Black Oxidizing
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Aluminum: White Anodized

###

Samples:
US$ 3/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL 0.08"(2.032MM)
XL 1/5"(5.08MM)
L 3/8"(9.525MM)
H 1/2"(12.7MM)
XH 7/8"(22.225MM)
XXH 1 1/4"(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

How to Identify a Sprocket

When choosing a sprocket, you have several options. There are several types, each with unique features. In this article, we’ll discuss how to identify sprockets, and how to replace worn or damaged sprockets.
sprocket

buy sprockets

When building a bicycle, sprockets are an important part of the drivetrain. Unfortunately, they’re hard to find outside of places like CZPT. Fortunately, there are some easy ways to find the right sprocket for your bike.
The first thing to consider is what kind of sprocket you need. Choosing the wrong sprocket can damage your equipment or cause it to fail prematurely. While sprockets come in a variety of sizes, there are some key features that can help you find the right one.
There are two basic types of sprockets. You can choose one made of steel or aluminum, or a combination of both. Most sprockets are made of steel, but there are also new aluminum sprockets that are similar to steel and last as long as steel. No matter which material you choose, it’s important to choose a reputable manufacturer with regular maintenance.
Buying sprockets that match your chain is another way to ensure proper installation. The chain goes through the sprockets thousands of times per minute, so the teeth eventually wear out. Poorly maintained sprockets can also cause “hook” teeth, which will cause your chain to stretch to the point where you can no longer adjust it.

Identify sprockets

One of the most common bicycle parts is the sprocket, which can be identified by its width and number of teeth. A single sprocket has one tooth along its circumference, while a double sprocket has two rows of teeth. Sprockets are also known by different names, including single, double, triple, and quadruple sprockets.
Roller sprockets are another type of sprocket. It runs along a chain of rollers connected by pins. It fits into the gap between the rollers in the chain to transfer kinetic energy. There are two basic styles of roller sprockets: single pitch and double pitch. Single-pitch sprockets are small and fit snugly against the equipment, while double-pitch sprockets are larger and require more thickness to support the weight.
Checking a sprocket is easy if you know how to count teeth. A simple caliper will allow you to easily find sprockets with worn teeth. Calipers also allow you to measure the hole of the sprocket, which is the inside diameter of the sprocket.
Another way to tell if a sprocket is worn is to visually inspect the sprocket. Worn sprockets can cause the chain to bounce, putting more pressure on the bearings and accelerating wear. It is also important to check the alignment of the sprockets. If it’s off center, it probably means the chain needs to be replaced.
sprocket

Replace sprocket

If you want to maintain your bike, it’s a good idea to replace your chain and sprockets regularly. If you don’t, you may have a problem that will only get worse. Worn chains can also make noise, so it’s a good idea to check them regularly. Also, you should lubricate and tighten them regularly, especially when they reach their maximum mileage.
First, you need to determine the size of the chain. Usually, you’ll find it in the manual. Common sizes are 520, 525, and 530. The first number refers to the pitch of the chain, which is the distance between the rivets, while the second number refers to the width of the sprocket. For example, a 20-tooth sprocket is two and a half inches wide.
Replacing a sprocket is a relatively simple process. Be sure to clean the bike and apply wheel bearing grease before tackling the task. Next, remove the old chain from the rear wheel. Some bikes may have clevises or side panels that need to be removed. A flat-blade screwdriver works well for this problem. You can also use the Broken Links tool to remove split links.
You can also install new sprockets on your bike. After removing the old one, be sure to follow the manufacturer’s instructions for chain and sprocket size. You should also tighten the sprocket nut to the manufacturer’s torque setting. Once you’ve done this, be sure to check the chain tension to make sure it’s not too loose or too tight.

Replace worn chains

To prevent damage to the chain, the chain must be replaced regularly. It’s prone to wear and tear, but you can extend the life of your bike’s chain with a few simple steps. One of the steps is to lift the rear wheel of the bike so you can run the new chain through the rear derailleur. This will make the task easier because your bike won’t be lying on the floor. If you don’t have a bike rack, you can use cinder blocks, wood, or boxes to support your bike rack.
The most obvious sign is yIf your chain bounces under load, our chainrings need to be replaced. Using a chain gauge will let you know when you need a new chain. Chain gauges usually consist of two sides and are used to measure the amount of wear on the chain under a given load. You can check the gauge by placing it on the chain and making sure it sinks into the chain.
First, you need to delete the old chain. Some older chains use uniform pins that you can use to replace them. Make sure to get a chain that is the same length as the old one. Also, pay attention to the type of drivetrain your bike has. For example, if it has a rear derailleur, you will need a chain that matches the same drivetrain.

Check the sprocket for rust

One of the best ways to check your bike for rust is to look for surface rust. This is the first sign that the metal is starting to oxidize. Using a steel brush to remove surface rust is a good idea, but be sure to wear safety glasses. You can also clean the sprockets with WD-40 or kerosene.
Another indicator that a sprocket needs to be replaced is excessive wear. This may be caused by foreign objects conveyed by the chain. It may also be necessary to center the chain and drive sprocket and install guide rollers. Other signs of sprocket rust include excessive vibration due to improperly machined axle holes or a bent or bent chain.
You should also look for any kinks in the chain. If so, you may need to replace the chain. Also, look for any rust spots and excess grease. Also, you should check the sprockets to make sure they are properly aligned.
Besides rust, another sign of rust is the chain jumping out of the sprocket. This can cause the chain to jam and cause your bike to slip. This situation is also dangerous for you and other drivers.
sprocket

Replace worn sprockets

You can repair your bike’s gears by replacing the sprockets. You should always check the chain for any signs of wear. In the case of a worn sprocket, you should check the teeth, which are usually tall and hooked.
If the sprocket is curled, skewed, or uneven, the sprocket is worn and needs to be replaced. If the sprockets are not replaced, they will wear out the chain very quickly. Chains should be replaced as soon as they show signs of excessive wear.
To replace a worn sprocket, you must first remove the old rear sprocket. To do this, loosen the bolts that hold the sprocket in place. You should also clean the hub surface with steel wool to reduce corrosion and wear.
Worn sprockets have worn teeth that keep the roller chain from slipping. This can cause the chain to climb up the sprockets and make a lot of noise. In addition to noise, chains can stick to worn sprockets and damage sprockets and chain. Don’t wait until the chain is out of control to fix it.
After the sprocket is removed, the rear sprocket and drive sprocket can be replaced. It is important to check the alignment of the sprockets, as incorrect alignment can cause premature chain wear. Proper alignment will distribute the load evenly across the entire width of the chain, extending the life of the chain. You can check the sprocket with a ruler or laser sight tool.

China Tl26-8m-30 Taper Locking Timing Belt Sprocket     sprocket chartChina Tl26-8m-30 Taper Locking Timing Belt Sprocket     sprocket chart
editor by czh 2022-12-08