China Welded Metric Roller Drive Conveyor Chain Gear Wheel Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket wholesaler

Item Description

Welded Metric Roller Travel Conveyor Chain Equipment Wheel Plastic Stainless Steel Duplex Cast Iron Plate Flat Leading Completed Bore Idler Bushed Taper Lock Qd Sprocket

Regular sprockets:

European standard sprockets

DIN stock bore sprockets & plateheels

03B-1 04B-1 05B-1-2 06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3
28B-1-2-3 32B-1-2-three

03A-1 04A-1 05A-1-2 06A-1-2-3 081A-1 083A-1/084A-1 085A-1 086A-1 08A-1-2-3 10A-1-2-3 12A-1-2-3 16A-1-2-3 20A-1-2-3 24A-1-2-3
28A-1-2-3 32A-1-2-3

DIN finished bore sprockets

06B-1 08B-1 10B-1 12B-1 16B-1 20B-1

stainless metal sprockets

06B-1 08B-1 10B-1 12B-1 16B-one

taper bore sprockets

3/8″×7/32″ 1/2″×5/sixteen” 5/8″×3/8″ 3/4″×7/16″ 1″×17.02mm 1 1/4″×3/4″

forged iron sprockets

06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3

platewheels for conveyor chain

20×16mm 30×17.02mm P50 P75 P100

desk best wheels

P38.1

loafer sprockets with ball bearing

8×1/8″ 3/8″×7/32″ 1/2″×1/8″ 1/2″×3/sixteen” 1/2″×5/16″ 5/8″×3/8″ 5/8″×3/8″ 5/8″×3/8″ 3/4″×7/sixteen” 3/4″×7/16″ 1″×17.02mm 1 1/4″×3/4″

double simplex sprockets

06B-1 08B-1 10B-1 12B-1 16B-1

American standard sprockets

ASA inventory bore sprockets

-2 35-3 -2 forty-3 50 50-2-50-3 60 60-2 sixty-3 80-eighty-2 eighty-3 a hundred one hundred-2 one hundred-3 one hundred twenty 120-2 one hundred twenty-3 140 one hundred forty-2 160 160-2 a hundred and eighty two hundred
two hundred-2 240

concluded bore sprockets

stainless steel sprockets

60

double solitary sprockets&single type Csprockets

taper bore sprockets

35 35-2 -2 50 fifty-2 sixty sixty-2 eighty 80-2

double pitch sprockets

2040/2042 2050/2052 2060/2062 2080/2082

sprockets with break up taper bushings

forty-2 40-3 50 fifty-2 50-3 60 sixty-2 60-3 80 eighty-2 eighty-3 one hundred one hundred-2 one hundred twenty 120-2

sprockets with QD bushings

35 35-1 35-2 -2 40-3 50 fifty-2 fifty-3 sixty sixty-2 60-3 80 80-2 80-3 100 100-2 one hundred-3

Japan standard sprockets

JIS inventory sprockets

140 one hundred sixty

concluded bore sprockets

FB25B FB35B FB40B FB50B FB60B FB80B FB100B FB120B

double solitary sprockets

40SD 50SD 60SD 80SD 100SD

double pitch sprockets

pace-ratio sprockets

C3B9N C3B10N C4B10N C4B11 C4B12 C5B10N C5B11 C5B12N C6B10N C6B11 C6B12

idler sprockets

35BB20H 40BB17H 40BB18H 50BB15H 50BB17H 60BB13H 60BB15H 80BB12H

table best sprockets

P38.one

 

Customization approach :

one.Offer documentation: CAD, DWG, DXF, PDF,3D product ,Action, IGS, PRT
two.Quote: We will give you the ideal cost within 24 hrs
three.Place an buy: Verify the cooperation details and indicator the contract, and provide the labeling support
4.Processing and customization: Brief shipping time

Related goods:

 

Our Manufacturing facility

If you require to customize transmission items,
please simply click listed here to make contact with us!

Chain Sprockets:

 

Firm Information:

 

 

 

 

US $1-30
/ Piece
|
100 Pieces

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Custom Made

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

###

European standard sprockets
DIN stock bore sprockets & plateheels
03B-1 04B-1 05B-1-2 06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3
28B-1-2-3 32B-1-2-3
03A-1 04A-1 05A-1-2 06A-1-2-3 081A-1 083A-1/084A-1 085A-1 086A-1 08A-1-2-3 10A-1-2-3 12A-1-2-3 16A-1-2-3 20A-1-2-3 24A-1-2-3
28A-1-2-3 32A-1-2-3
DIN finished bore sprockets
06B-1 08B-1 10B-1 12B-1 16B-1 20B-1
stainless steel sprockets
06B-1 08B-1 10B-1 12B-1 16B-1
taper bore sprockets
3/8"×7/32" 1/2"×5/16" 5/8"×3/8" 3/4"×7/16" 1"×17.02mm 1 1/4"×3/4"
cast iron sprockets
06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3
platewheels for conveyor chain
20×16mm 30×17.02mm P50 P75 P100
table top wheels
P38.1
idler sprockets with ball bearing
8×1/8" 3/8"×7/32" 1/2"×1/8" 1/2"×3/16" 1/2"×5/16" 5/8"×3/8" 5/8"×3/8" 5/8"×3/8" 3/4"×7/16" 3/4"×7/16" 1"×17.02mm 1 1/4"×3/4"
double simplex sprockets
06B-1 08B-1 10B-1 12B-1 16B-1
American standard sprockets
ASA stock bore sprockets
25 35 35-2 35-3 41 40 40-2 40-3 50 50-2-50-3 60 60-2 60-3 80-80-2 80-3 100 100-2 100-3 120 120-2 120-3 140 140-2 160 160-2 180 200
200-2 240
finished bore sprockets
35 41 40 50 60 80 100
stainless steel sprockets
25 35 40 50 60
double single sprockets&single type Csprockets
40 50 60 80
taper bore sprockets
35 35-2 41 40 40-2 50 50-2 60 60-2 80 80-2 100 120 140 160
double pitch sprockets
2040/2042 2050/2052 2060/2062 2080/2082
sprockets with split taper bushings
35 41 40 40 40-2 40-3 50 50-2 50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 120 120-2 140 160 200
sprockets with QD bushings
35 35-1 35-2 41 40 40-2 40-3 50 50-2 50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 100-3 120 140 160 200
Japan standard sprockets
JIS stock sprockets
25 35 40 50 60 80 100 120 140 160
finished bore sprockets
FB25B FB35B FB40B FB50B FB60B FB80B FB100B FB120B
double single sprockets
40SD 50SD 60SD 80SD 100SD
double pitch sprockets
2042 2052 2062 2082 2040 2050 2060 2080
speed-ratio sprockets
C3B9N C3B10N C4B10N C4B11 C4B12 C5B10N C5B11 C5B12N C6B10N C6B11 C6B12
idler sprockets
35BB20H 40BB17H 40BB18H 50BB15H 50BB17H 60BB13H 60BB15H 80BB12H
table top sprockets
P38.1
US $1-30
/ Piece
|
100 Pieces

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Custom Made

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

###

European standard sprockets
DIN stock bore sprockets & plateheels
03B-1 04B-1 05B-1-2 06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3
28B-1-2-3 32B-1-2-3
03A-1 04A-1 05A-1-2 06A-1-2-3 081A-1 083A-1/084A-1 085A-1 086A-1 08A-1-2-3 10A-1-2-3 12A-1-2-3 16A-1-2-3 20A-1-2-3 24A-1-2-3
28A-1-2-3 32A-1-2-3
DIN finished bore sprockets
06B-1 08B-1 10B-1 12B-1 16B-1 20B-1
stainless steel sprockets
06B-1 08B-1 10B-1 12B-1 16B-1
taper bore sprockets
3/8"×7/32" 1/2"×5/16" 5/8"×3/8" 3/4"×7/16" 1"×17.02mm 1 1/4"×3/4"
cast iron sprockets
06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3
platewheels for conveyor chain
20×16mm 30×17.02mm P50 P75 P100
table top wheels
P38.1
idler sprockets with ball bearing
8×1/8" 3/8"×7/32" 1/2"×1/8" 1/2"×3/16" 1/2"×5/16" 5/8"×3/8" 5/8"×3/8" 5/8"×3/8" 3/4"×7/16" 3/4"×7/16" 1"×17.02mm 1 1/4"×3/4"
double simplex sprockets
06B-1 08B-1 10B-1 12B-1 16B-1
American standard sprockets
ASA stock bore sprockets
25 35 35-2 35-3 41 40 40-2 40-3 50 50-2-50-3 60 60-2 60-3 80-80-2 80-3 100 100-2 100-3 120 120-2 120-3 140 140-2 160 160-2 180 200
200-2 240
finished bore sprockets
35 41 40 50 60 80 100
stainless steel sprockets
25 35 40 50 60
double single sprockets&single type Csprockets
40 50 60 80
taper bore sprockets
35 35-2 41 40 40-2 50 50-2 60 60-2 80 80-2 100 120 140 160
double pitch sprockets
2040/2042 2050/2052 2060/2062 2080/2082
sprockets with split taper bushings
35 41 40 40 40-2 40-3 50 50-2 50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 120 120-2 140 160 200
sprockets with QD bushings
35 35-1 35-2 41 40 40-2 40-3 50 50-2 50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 100-3 120 140 160 200
Japan standard sprockets
JIS stock sprockets
25 35 40 50 60 80 100 120 140 160
finished bore sprockets
FB25B FB35B FB40B FB50B FB60B FB80B FB100B FB120B
double single sprockets
40SD 50SD 60SD 80SD 100SD
double pitch sprockets
2042 2052 2062 2082 2040 2050 2060 2080
speed-ratio sprockets
C3B9N C3B10N C4B10N C4B11 C4B12 C5B10N C5B11 C5B12N C6B10N C6B11 C6B12
idler sprockets
35BB20H 40BB17H 40BB18H 50BB15H 50BB17H 60BB13H 60BB15H 80BB12H
table top sprockets
P38.1

How to choose the right sprocket

Knowing the size of the chain is important when looking for the right sprocket. Also, you must know the number of teeth you need and their angle. The angle between the teeth is equal to 360 degrees divided by the number of teeth. This information will help you find the right sprocket for your specific application.sprocket

Long Through Hole

Sprockets are critical to the efficiency and uptime of roller chain drives. To ensure your sprocket is installed correctly, it is important to know the dimensions of the sprocket, including its outside diameter, through-hole length, and hub diameter. Pore ​​size is also an important consideration. Most sprockets have a 1/8″ bore, while others may have a larger bore.
Sprockets are usually secured to the shaft using ANSI standard-sized keyways and set screws. However, not all sprockets are compatible with all shaft diameters, so it is important to check the keyway size before purchasing.
Sprockets are available in a variety of styles and configurations. Some types of sprockets are welded to a solid hub, while others are bolted or split to the hub. Both types have different adjustments and you can easily change them without disassembling the device. Sprockets can be purchased from many US manufacturers in A, B or C hub configurations. For example, the hub diameter of an A-type sprocket determines its width, while a B-type sprocket has a hole for a bushing.
Sprockets are used in chain-driven motion systems, usually to carry heavy loads. It is very important to choose the right app for the right app to avoid damaging your device. If you’re not sure, learn about your system and how it’s assembled.

face width

The face width of the sprocket is limited by the meshing clearance with the chain. It does not affect tooth length. The outside diameter of the chain tip may vary depending on the type of tool used. Dimensional tolerances for keyways and set screws are also important.

diameter

One of the most important characteristics of a sprocket is its diameter. The diameter of the sprocket is used as a guide for choosing the proper sprocket size for your bike. Its number of teeth and diameter also affect the size of the chain.
The diameter of a sprocket is a function of its pitch or the distance between the centers of the link hinges. Diameters are in millimeters and expressed in standard ANSI chain numbers. Popular spacing is 3/8″ or 1/2″.
In order to make the chain drive smoothly, the sprocket and the chain should be properly matched. Incorrect pitch sprockets can damage the chain and shorten its life. Sprockets should provide precise tooth count, consistent pitch, and high wear resistance. It should also be designed to be rigid and impact resistant. CZPT chain suppliers can custom design sprockets in a variety of sizes, pitches, and diameters to suit your needs.
The number of teeth on the roller sprocket is also important. This is because the sprocket is in contact with the chain, causing frictional wear. The teeth on the sprocket can affect the durability of the chain, which is why choosing a sprocket with hardened teeth can change the world.sprocket

hub type

The hub type of the sprocket is key to proper engagement with the chain. Several options are available. The sprocket hub type is cylindrical and is available in a variety of sizes and styles. Sprockets are usually made of steel or stainless steel.
There are four main types of hubs for sprockets. They come under different names from different manufacturers, but they all share some common characteristics. These include Types A, B, and C. Each type has its own advantages and disadvantages. A-Plate sprockets are flat and have no hubs, while B-Hub sprockets are flat with hubs mounted on one side of the plate. C-shaped sprockets extend on both sides of the plate for larger pitch circle diameters and heavier axles.
A sprocket with a large pitch diameter needs a sprocket with a large pitch, and a chain with a small pitch diameter needs a chain with a small pitch. A-type sprockets are smaller and fit more closely to the equipment, while C-type sprockets need to be wider and thicker to carry more weight. Also, the pitch diameter is important because it determines whether the sprocket will fit correctly with the chain.
Steel split sprockets are easy to install and remove. They are held together by bolts on the hub, ranging in pitch size from 40 to 240. They are typically used in applications involving multiple drive shafts.

HZPT ZTB series

ZTB sprockets are an important part of a bicycle chain system. Its uptime is very important to maximize uptime and efficiency. key cSelect sprockets are characterized by size, pitch and bore. MDS accepts sprockets of various bore diameters from 1/2″ to 2″.
A sprocket is a wheel-like structure with teeth on the end. These teeth interlock with the chain, allowing simple rotational movement of large machines and equipment. ZTB sprockets are an excellent choice for a wide range of applications, including construction and agricultural machinery.
ISO sprockets have a suffix number indicating the number of chains in the chain. For example, 16B-2 sprockets have 1″ pitch and dual spools. If you’re buying sprockets for your bike, be sure to check the sprocket pitch.
The teeth on the sprocket are responsible for frictional wear, so choosing the right teeth is critical. The right teeth can increase the life of the sprocket and chain. A good sprocket has at least 17 teeth. Sprockets with a higher number of teeth last longer without causing chain slip. Typically, the teeth are the same material as the sprockets, but you can find removable teeth for a more affordable option. The teeth on the sprocket can also be hardened. Induction hardening is the most commonly used process.
ZTB sprockets can be made from many different materials. Some materials are more expensive than others, while others are softer and stronger. If you’re not sure which one to buy, try explaining the difference between the different sprockets to the sprocket manufacturer. They should be able to give you details about their interchangeability and quality.
sprocket

set screw

Set screws are screws designed to hold two or more parts together. There are many different types of set screws, each with a different purpose and design. They usually come in imperial and metric sizes with a hex socket driver on one end and a cup tip on the other. They are made of hardened steel and have a black oxide finish. Some varieties have flanges, while others don’t.
Set screws with chain studs can be used in a variety of applications. For example, they can be used in agricultural equipment, heavy equipment and other industries. They come in several different sizes and thread sizes and are available in a variety of designs. Some are specific to the mining industry, while others are more general.
The company also offers custom setscrews, as well as hex, spline, square and socket heads. They have the capability to manufacture fasteners ranging from carbon steel to nickel and silicon bronze. Their products also meet Mil-I-4528 and QS 14000 standards.

China Welded Metric Roller Drive Conveyor Chain Gear Wheel Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket     wholesaler China Welded Metric Roller Drive Conveyor Chain Gear Wheel Plastic Stainless Steel Duplex Cast Iron Plate Flat Top Finished Bore Idler Bushed Taper Lock Qd Sprocket     wholesaler
editor by czh2022-12-01

Tagsbore roller chain sprocket | bore sprocket | bushed roller chain | bushed steel chain | cast chain | cast chain sprocket | cast iron gear wheel | cast iron sprocket | chain | chain conveyor | chain conveyor chain | chain conveyor conveyor | chain conveyor drive chain | Chain Conveyor Roller | chain conveyor sprocket | chain drive | chain drive conveyor | chain drive conveyor roller | chain drive gear | chain drive roller conveyor | chain drive roller conveyor roller | chain drive sprocket | chain gear | chain plastic sprocket | chain plate conveyor | chain roller | chain roller chain | Chain Roller Conveyor | chain roller sprocket | chain sprocket | chain sprocket conveyor | chain sprocket roller | chain top | chain wheel sprocket | china chain | china chain conveyor | china chain plate conveyor | china chain roller conveyor | china conveyor chain | china conveyor roller chain | china duplex chain drive | china duplex roller chain | China Roller Chain | china roller chain conveyor | china roller chain drive | china roller chain lock | china roller conveyor chain | china sprocket | china stainless steel chain conveyor | china stainless steel conveyor chain | china steel conveyor chain | china top roller chain | conveyor chain | conveyor chain drive | conveyor chain lock | conveyor chain plastic | conveyor chain roller | conveyor chain roller top | conveyor chain sprocket | conveyor chain top | conveyor drive chain | conveyor flat top chain | conveyor plastic chain | Conveyor Roller Chain | Conveyor Roller Chain Sprocket | conveyor sprocket | conveyor top chain | conveyor top roller chain | drive chain | drive chain stainless steel conveyor roller chain | drive conveyor chain | drive gear | drive roller chain | drive sprocket | drive sprocket wheel | duplex chain | duplex chain drive | duplex chain sprocket | duplex roller chain | duplex roller chain drive | duplex sprocket gear | flat chain | flat chain conveyor | flat conveyor chain | flat top chain | flat top chain conveyor | flat top conveyor chain | flat top stainless conveyor chain | gear | gear chain | gear drive | gear drive chain | gear lock | gear sprocket | gear wheel | idler roller chain | idler sprocket | iron chain | lock roller chain | metric chain | metric chain roller | metric conveyor chain | metric roller chain | metric roller chain sprocket | plastic chain conveyor | plastic chain drive | plastic chain sprocket | plastic conveyor chain | plastic drive chain | plastic flat top conveyor chain | plastic gear | plastic roller chain | plastic roller chain conveyor | plastic roller chain sprocket | plastic roller conveyor chain | plastic sprocket wheel | plate chain conveyor | plate wheel sprocket | roller chain | roller chain chain | roller chain conveyor | roller chain conveyor chain | roller chain conveyor drive | roller chain conveyor plastic sprocket | roller chain drive | roller chain flat | roller chain gear | roller chain idler | roller chain idler sprocket | roller chain idler wheel | roller chain lock | roller chain metric | roller chain sprocket | roller chain stainless steel | roller chain wheel | Roller Conveyor Chain | roller conveyor chain drive | roller gear | roller plastic chain | roller plate chain conveyor | roller sprocket | roller sprocket chain | roller steel chain | roller top chain | sprocket | sprocket chain wheel | sprocket conveyor chain | sprocket gear | sprocket lock | sprocket plate | sprocket roller chain | sprocket wheel | stainless conveyor chain | stainless roller chain | stainless steel chain | stainless steel chain conveyor | stainless steel conveyor chain | stainless steel conveyor roller chain | stainless steel drive chain | stainless steel idler sprocket | stainless steel roller chain | stainless steel roller chain conveyor chain | steel chain | Steel Chain Conveyor | Steel Conveyor Chain | steel conveyor chain roller | Steel Roller Chain | steel roller conveyor chain | steel sprocket | steel sprocket wheel | taper lock | taper lock sprocket | top chain conveyor | top chain plate conveyor | top conveyor chain | top gear | Top Roller Chain | Top Roller Conveyor Chain | welded chain | wheel gear | wheel roller chain | wheel sprocket